Loading ...
Loading ...
Loading ...
14
CONNECTING AND REMOVING BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the power tool for the first time, place
the battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the
instructions in the battery charger section.
To install the battery pack
1. Open the battery compartment cover and align guided ribs on
battery pack with grooves in the product’s battery port, slide the
battery vertical down.
Note:Make sure the latch on bottom of the battery pack snaps in
place and that battery pack is fully seated and secure in the product
before beginning operation.
2. Insert the safety key into the slot and close the battery
compartment cover.
WARNING: If the machine is not going to be used immediately,
do not insert the safety key.
To remove the battery pack
Remove safety key.
Press and hold the battery latch button at the bottom of the
battery pack.
Remove battery pack from the product.
WARNING:Follow these instructions in order to avoid injury and to reduce the risk of electric
shock or fire:
Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on
any part of the power tool.
Read, understand, and follow the instructions.
OPERATING INSTRUCTIONS
WARNING: Do not allow familiarity with tools to make you careless. Remember that a
careless fraction of a second is sufficient to inflict serious injury.
WARNING: Always wear safety goggles or safety glasses with side shields when operating
tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible
serious injury.
WARNING: Do not use any attachments or accessories not recommended by the
manufacturer of this tool. The use of attachments or accessories not recommended can result
in serious personal injury.
WARNING: Do not allow hands, feet, or any other part of the body or clothing near the
rotating tines or any other moving part. The tines begin to rotate forward once the switch
trigger is depressed. The tines continue to rotate until the switch trigger is released. Failure to
avoid contact could cause serious personal injury.
Loading ...
Loading ...
Loading ...