Loading ...
SECURING THE CANOPY TOP TO THE FRAME
SINGLE PERSON TAKE DOWN
1
2
3
1
3
2
SECURING YOUR CANOPY: To harness your canopy to the ground, insert the included metal stakes into each foot corner.
For additional stability, you can purchase from our Customer Support Center anchor bags custom designed to secure quickly
to each leg for additional weight on any surface.
1AFig. 1BFig. 3AFig. 2AFig.
Slightly li a leg and depress the push button to unlock the inner leg and telescope into the outer leg
as shown (Fig. 1A). Repeat by lowering the leg on same side resulting in one low side and one high side
as shown (Fig 1B).
Go underneath the high side of the canopy to turn the hub ¼ turn counter clockwise to unlock the frame
as shown (Fig 2A). Walk back out and lower the other two legs as you did in step .
Position one hand on any frame leg just below the black fastening strip and li slightly off the ground
walking towards the opposite leg corner to fold the canopy frame as shown (Fig. 3A). Be careful not to pinch
your fingers as the frame closes. Store canopy in wheeled carry bag. Please see instructions on page 4.
TWO PERSON SETUP
Place the canopy frame in the desired location (Fig. 1A).
With partner, stand on opposite side of the frame. While holding the legs li slightly off the ground taking
a few steps backwards to extend frame at full arm’s length as shown (Fig. 2A).
Unfold the canopy top and place it over the open frame (Fig. 3A). Secure each corner by attaching the corner
of the canopy top to the black fastening strip (Fig. 3B). Pull all 4 corners down until completely
over black fastening strip. Attach fastening loops to the eaves of the frame as shown in (Fig. 3C)
Your top is now serured to the frame.
1AFig. 3AFig. 3BFig. 2AFig.
page 2
3CFig.
Loading ...
Loading ...