Loading ...
Loading ...
Loading ...
Status light
The status light at the bottom on the dishwasher provides information by means of 3 different colors.
Status light
Blue - Load more
The program has started, but you can still load more dishes.
Red - Do not load
You should not load more dishes (can result in poor dishwashing).
A flashing light indicates that the door has been opened while a program is in progress. If it flashes
when the door is closed, an error has occurred. See the chapter Troubleshooting.
Green - Unload
The dishwashing program is finished. The status light stays on for 30 minutes.
Flashing blue/green
The status light flashes blue/green to indicate that remote start is activated.
If you want to load more dishes
4)
Open the door. The dishwasher stops automatically. Add the dishes. Press and close the door
within four seconds.
If the dishwashing program was remote started, the program will be paused. Press and close
the door within four seconds and the interrupted program will continue. You can monitor the
dishwasher using the Connect Life app and remote stop the program, although you will not be able
to remote start it again.
WARNING!
If the door is open, "Program paused" is shown on the display. If you want the dishwashing
program to continue, press and close the door immediately. If you want to cancel the
dishwashing program, press and hold for three seconds.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is lost during drying, the program is
interrupted.
4)
You should not load more dishes if the status light is red.
25
Using the dishwasher
Loading ...
Loading ...
Loading ...