Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 349
6. Block both front and rear of the wheel
diagonally opposite of the jacking position.
For example, if the driver’s front wheel is being
changed, block the passenger’s rear wheel.
Wheel Blocked Example
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being raised or lifted.
JACK LOCATION
The jack and tools are stored under the front
passenger seat.
REMOVAL OF JACK AND TOOLS
To access the jack and tools, you must remove the
plastic access cover located on the side of the front
passenger’s seat. To remove the cover, pull the front
part of the cover (closest to the front of the seat)
toward you to release a locking tab. Once the front of
the cover is loose, slide the cover toward the front of
the seat until it is free from the seat frame.
Jack Access Cover
Remove the jack and tools by turning the wing bolt
counterclockwise, remove the wing bolt and then
slide the assembly out from under the seat.
Wing Bolt/Jack And Tools
7
22_DJD2_OM_EN_USC_t.book Page 349
Loading ...
Loading ...
Loading ...