Loading ...
Loading ...
Loading ...
4 | CARING FOR THE PORCELAIN ENAMEL KETTLE | 1.9 L
• The kettle is not dishwasher safe.
Hand wash only. Surface damage due to
chemical interaction or cleaning agents
including, but not limited to, scouring
pads, abrasive cleaners, or automatic
dishwashers is not covered under your
product’s limited warranty.
• For best results, empty the kettle and
wash with hot soapy water after each
use. Rinse and dry thoroughly.
• Do not use harsh abrasives or steel wool
to clean the kettle exterior, as scratching
may result.
• If mineral deposits form on the inside of
the kettle due to hard water, fill kettle
with equal amounts of water and white
vinegar. Bring to a boil, reduce heat,
and simmer for ten minutes. Pour out
water and vinegar solution and rinse
well. Repeat if necessary.
• The exterior of the porcelain-coated
kettle can be cleaned with a soft sponge
or any nonabrasive cleaning pad. Use
warm, soapy water and rinse; then dry
thoroughly.
STAINLESS STEEL KETTLES ONLY:
• The exterior of stainless steel kettles
can be cleaned with a soft sponge or
any nonabrasive cleaning pad. Use
warm, soapy water and rinse; then dry
thoroughly.
• Remove any spotted white film with a
mild solution of water and lemon juice
or vinegar.
• Overheating may cause brown or blue
stains on your kettle. Polishing may
remove these stains. To polish your
kettle, use a stainless steel cleaner
with a soft cloth and rub with a circular
motion. Wash, rinse, and dry.
• Before use, wash with hot, soapy water.
Rinse and dry exterior.
• Overheating can make kettles with
porcelain enamel bottoms fuse to
the surface of glass cooktop ranges,
requiring the replacement of the glass
cooktop. Do not leave the kettle on a
glass cooktop; remove it, and place on
a heat-resistant surface such as a cutting
board.
• Use potholders or oven mitts when
handling hot kettles.
• Always lift the kettle when removing
it from the cooktop surface. Sliding or
dragging may damage the cooktop
surface or base of the kettle.
• This kettle is not intended for
commercial or restaurant use.
• For best results, match the kettle base
size with the cooktop burner size. Do
not allow gas flames to extend up the
side of the kettle.
• Avoid overfilling the kettle. Maximum fill
level is below the bottom of the spout.
The kettle should be at least half full
before boiling. Do not allow the kettle
to boil dry.
• Ensure that the kettle lid is securely
seated on top of the kettle.
• For best results, heat the kettle on
medium to medium high heat.
• When the kettle begins to whistle, the
water is heated. For proper whistling
to occur, ensure that the water level is
below the spout of the kettle and that
the lid is securely seated.
• Allow the kettle to cool on a heat-
resistant surface. Do not leave kettle
on a hot burner.
• Contact KitchenAid if the kettle fails
to whistle while still under warranty.
USING THE PORCELAIN ENAMEL
KETTLE | 1.9 L
CARING FOR THE PORCELAIN ENAMEL
KETTLE | 1.9 L
©2018 All rights reserved.
Specifications subject to change without notice.
W11266532A.indb 4 9/24/2018 12:05:48 PM
Loading ...
Loading ...
Loading ...