Tesla Technology WT8H91M Tumble dryers

User manual - Page 10

For WT8H91M.

PDF File Manual, 52 pages, Read Online | Download pdf file

WT8H91M photo
Loading ...
Loading ...
Loading ...
10
ENG
Intensity
Use for adjusting the dryness level of the laundry.
The level has four grades.
The drying time increases 5 minutes in every grade.
1. The intensity function can be activated only before the programme starts.
2. Press the
button repeatedly to select the drying time.
3. Except the
, all the other
programmes can be set with the function.
Anti-Crease
At the end of the drying cycle,the anti-crease phase time is 30 minutes (default ) or 120 minutes
(selected).
This function prevents the laundry from creases. The laundry can be removed during the anti-crease
phase. Except
, and , all the other programmes have this function.
Lamp
The lamp inside the drum will be on for lighting about 3 minutes when the button is pressed or 1
minute when the door is open.
Signal
Set the buzzer on or off. In general condition, the buzzer is on. Please touch it if needed.
When the buzzer is on:
1. The dryer will make the leading sound if press the extra function buttons.
2. If the programme knob is rotated when the dryer is running,the dryer will remind the operator
that it is an invalid programme selection.
3. When the drying programme is done, the buzzer will beep to remind the user.
Intensity
Anti-
Crease
Lamp
Signal
My Cycle
Used to define and save your favorite programmes that are used frequently.
1. Use the programme knob to select the required programme and other drying functions.
2. Press and hold the button with
for 3 seconds until the beep and the required
programme has been saved.
3. Turn the programme selector to the
position, then you can start your favorite
programmes.
If you want to change the settings, repeat the steps (1) and (2).
Child Lock
1. This machine incorporates a special child safety lock, which can prevent children from carelessly
pressing buttons or making the faulty operation.
2. When the dryer is at the operation status, press the
and buttons at the same
time for over 3 seconds to start child lock function. When child lock function is set, the display
will show Child lock icon and no key can have an effect on the dryer except button.
To activate the child lock function, the and buttons shall be pressed at the
same time for over 3 seconds.
My Cycle
Child
Lock
Loading ...
Loading ...
Loading ...