Loading ...
Loading ...
Loading ...
3
Model Covered in this Specification -
CP4 GAS PASTA COOKER (Single Tank - 40 Ltr).
CN4 GAS NOODLE COOKER (Single Tank - 40 Ltr).
A commercial heavy duty, gas fired high
performance Pasta / Noodle Cooker designed for
cooking commercial high production output, using
LPG (Propane), Natural Gas or Butane. The boiling
medium is contained within a heavy gauge stainless
steel tank, heated by one infra red surface burner
from beneath the tank.
This Pasta / Noodle Cooker features an Over
Temperature Safety Cut Out System with Full Flame
Failure Safety Controls.
An open tank design to make cleaning a simple
and easy task.
Gas supply connection point is located 152mm from
the left hand side, 33mm from the rear and 140mm
from the floor.
Gas Connection is
3
/
4
” BSP male.
- Flexible Hose Connection
If a Gas Hose assembly is used to connect this
appliance, the hose and all fittings must have a
minimum ¾” (Natural Gas) or ½” (LPG) inside bore
diameter to ensure gas flow rate capacity
required by this appliance is achieved.
This must be verified by the operating pressure
testing at the maximum gas supply demand
condition.
The Gas Hose assembly should also be classified
for use in the commercial kitchen conditions, the
appliance will be used in.
Recommended Gas Hose Assembly Specification:
- AS/NZS 1869 Class B or D compliant or equivalent,
that meets the following requirements:-
Dimensions:-
Class
Max Working
Pressure
at 23 ± 2ºC
Working
Temperature
Range
Resistance to Oil
B
7.0 kPa
- 20ºC to + 125ºC
Oil resistant lining
and cover.
D
2.6 MPa
Loading ...
Loading ...
Loading ...