Loading ...
Loading ...
Loading ...
ERROR CODES
Problem Solutions
Load is too wet
at the end of
the cycle
•
sudsing. See Selecting a detergent on page 29.
•
The load may be too small. Very small loads (one or
two items) may become unbalanced and not spin out
completely.
Water leaks
•
Make sure that all hose connections are tight. See
Connect the water hoses on page 19 and Connect the
drain hose on page 22.
•
Make sure that the end of the drain hose is correctly
inserted and secured to the drainage system. See
Connect the drain hose on page 21.
•
Avoid overloading.
•
sudsing. See Selecting a detergent on page 29.
Oversuds
condition
•
sudsing. See Selecting a detergent on page 29.
•
If you have"soft" water, reduce the amount of
detergent.
•
For small or lightly soiled loads, reduce the amount of
detergent.
Prevent odor
•
Periodically run a Tub Clean cycle to clean the tub.
See Cleaning the tub on page 38.
•
sudsing. Excessive suds collect in nooks and crannies
and cause odor. See Selecting a detergent on page
29.
•
Dry the interior of your washer after the total cycle
has finished.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
Troubleshooting
Washer Use
Description Reason Solutions
E1
Your washer takes more
than 30 minutes to fill
With water at the low
water level, 45 mins at
medium water level, or
60mins at the high water
level.
•
Make sure that the lid is
not open.
•
Make sure that water
is not leaking. See No
water or not enough
water on page 40.
•
Contact Midea service
center.
42
Loading ...
Loading ...
Loading ...