Midea MLTW45M4BWW 4.5 Cu.Ft. Smart Top Load Washer with Wave Impeller

4.5 Cu.Ft. Smart Top Load Washer User Manual - Page 41

For MLTW45M4BWW.

PDF File Manual, 94 pages, Read Online | Download pdf file

MLTW45M4BWW photo
Loading ...
Loading ...
Loading ...
Problem Solutions
Washer stops
Make sure that the power outlet is a working outlet.
Check the fuse or reset the circuit breaker.
Close the lid, then press the Start Pause button to
start your washer. For your safety, your washer does
not spin unless the lid is closed.
Before your washer starts to fill, it makes a series of
clicking noises to make sure that the lid is locked and
to do a quick drain.
Sometimes your washer may pause between stages in
the cycle. Wait to see if your washer starts again.
Disconnect the inlet hoses and clean the screens
periodically. The hose filter screens may be clogged.
Lid is locked
orwill not
open
Press the Start Pause button to pause the washer. You
cannot open the lid if the washer is running.
After you pause the washer, it may take a few seconds
for the lid lock to release.
If the lid is locked when your washer is not running,
press the Power button to turn on your washer.
If power fails while your washer is running, when
power is restored, the lid unlocks. Your washer waits
three minutes then runs the rest of the cycle.
Washer does
not drain or
spin
Check the fuse or reset the circuit breaker.
Close the lid, then press the Start Pause button to
start your washer. For your safety, your washer does
not spin unless the lid is closed.
Make sure that the drain hose is not kinked.
Straighten as necessary.
Make sure that the height of the drain hose is within
specified limits. See Drainage requirements on page
14.
The pipes to your sewer system may be clogged.
Contact a plumber or qualified repair professional.
The water
temperature
isnot correct
Make sure that you have selected the correct temp.
Make sure that the water source faucets are fully
opened.
Make sure that the hoses are connected to the
correct faucet and water intake connections on your
washer, then flush the lines. See Connect the water
hoses on page 19.
Disconnect the hoses and clean the screens. The
hose filter screens may be clogged.
41
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
Loading ...
Loading ...
Loading ...