Loading ...
Loading ...
Loading ...
©2018 DreamLine. All Rights Reserved
23ENIGMA-XO manual Ver 1 Rev 2 03/2018
48”or 60”
model
NOTE: The Safety set screw on both wheels MUST BE
re-tightened after installation to prevent the large bolt
from coming loose. Apply thread lock during installation.
(See details Fig 23 and also on Page 28)
1
2
3*
door
small panel
4
Fig 23
Fig 24
door
wall
(Right hand door installation shown as an example)
outside
door
inline panel
inside
!
add threadlock to
the safety set screw
and wheel bolt
72” model
23. Press the Anti-Water Strip (#14) onto the vertical edge
of the Stationary Glass (#02) and the Door Glass (#05)
(Fig 24.1).
Press the Bumper Strip (#13) onto the vertical edge of the
Door Glass (#05) (48” and 60“ model). (Fig 24.2)
For the 72” model: Attach Anti-Water Strip (#14) to the
edge of the Small Stationary Glass (#23). The Bumper
Strip (#13) is not necessary with the 72” model (Fig 24.3*).
Attach the Handle (#06) to the Door Glass (#05). (Fig 24)
Note: Use a razor knife to trim the Anti-Water Strip (#14) at
the top to avoid interfering with the lower Rollers (#04).
Loading ...
Loading ...
Loading ...