E (NAA)
Instructions for Use
For your safety: read and understand manual before use.
Table of contents
Your E
IMPORTANT SAFEGUARDS ����������������������������������������������������������������������������������������4
Control elements ����������������������������������������������������������������������������������������������������8
Preparing and using for the first time �����������������������������������������������������������������������10
Setting up the machine �������������������������������������������������������������������������������������������10
Filling the bean container �����������������������������������������������������������������������������������������10
Determining the water hardness ��������������������������������������������������������������������������������10
First-time use �������������������������������������������������������������������������������������������������������� 11
Managing your E8 – the JURA Cockpit ������������������������������������������������������������������������13
Connecting milk �����������������������������������������������������������������������������������������������������13
Connecting the Cool Control milk cooler (wirelessly) ������������������������������������������������������13
Connecting the machine to the WiFi network ���������������������������������������������������������������14
Preparation ����������������������������������������������������������������������������������������������������������15
Preparation with preselection (Specialty Selection) ��������������������������������������������������������16
Espresso and coffee ������������������������������������������������������������������������������������������������16
Latte macchiato, cappuccino and other specialty coffees with milk ������������������������������������16
Caffè Barista and Americano ������������������������������������������������������������������������������������17
Espresso doppio ����������������������������������������������������������������������������������������������������� 17
Ground coffee ��������������������������������������������������������������������������������������������������������17
Hot water �������������������������������������������������������������������������������������������������������������18
Adjusting the grinder ����������������������������������������������������������������������������������������������18
Adjusting the product settings ����������������������������������������������������������������������������������19
Daily operation ����������������������������������������������������������������������������������������������������20
Switching the machine on and off �����������������������������������������������������������������������������20
Filling the water tank ����������������������������������������������������������������������������������������������20
Maintenance actions ���������������������������������������������������������������������������������������������� 20
Machine settings �������������������������������������������������������������������������������������������������� 22
Maintenance �������������������������������������������������������������������������������������������������������� 23
Rinsing the machine ���������������������������������������������������������������������������������������������� 23
Rinsing the milk system ������������������������������������������������������������������������������������������24
Cleaning the milk system ���������������������������������������������������������������������������������������� 24
Dismantling and rinsing the fine foam frother ������������������������������������������������������������� 25
Inserting/changing the filter ������������������������������������������������������������������������������������� 26
Cleaning the machine �������������������������������������������������������������������������������������������� 27
Table of contents
Descaling the machine ������������������������������������������������������������������������������������������28
Descaling the water tank �����������������������������������������������������������������������������������������30
Cleaning the bean container ������������������������������������������������������������������������������������30
Display messages ��������������������������������������������������������������������������������������������������31
Troubleshooting ��������������������������������������������������������������������������������������������������� 32
Transport and environmentally friendly disposal �������������������������������������������������������� 33
Transport/ Emptying the system ������������������������������������������������������������������������������ 33
Disposal �������������������������������������������������������������������������������������������������������������� 33
Technical data ����������������������������������������������������������������������������������������������������� 34
Index ����������������������������������������������������������������������������������������������������������������� 35
JURA contact details/ Legal information �����������������������������������������������������������������40
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
Failure to observe the instructions for use may result in serious
injuries or damage to property. Safety information is therefore
indicated as follows:
J
This is the safety alert symbol� lt is used to
alert you to potential personal injury hazards�
Obey all safety messages that follow this
symbol to avoid possible injury or death�
DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious
injury�
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury�
J CAUTION
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate
injury�
NOTICE NOTICE is used to address practices not related
to personal injury�
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
Z Read all instructions.
Z Do not touch hot surfaces. Use handles or knobs.
Z To protect against fire, electric shock and injury to persons, do
not immerse power cord, plugs, or body of machine in water
or other liquid.
Z Close supervision is necessary when any appliance is used by
or near children.
Z Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Z Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
Z The use of an accessory attachment not recommended by the
Comply with the
instructions for use
J DANGER
J WARNING
Follow the basic safety
precautions
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS. Pass them on to any subsequent user.
The appliance is designed and intended for household use only. It
shall only be used for coffee preparation and to heat milk and water,
according to these instructions. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
People, including children, who
Z do not have the physical, sensory or mental capabilities to use
the appliance safely or
Z are inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Z A short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
Z The cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children
or tripped over.
Z This appliance has a 3-pin grounded plug.
Z Do not modify the plug in any way.
Intended use
Special power cord set
instructions
appliance manufacturer may result in fire, electric shock, or
injury to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
Z Do not place on or near a hot gas or electric burner, or in a
heated oven.
Z To disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
Z Do not use appliance for other than intended use.
Z Use extreme caution when dispensing hot steam, hot water
or hot coffee.
IMPORTANT SAFEGUARDS
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Z the marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Z if the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Z the longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
This appliance is for household use. Any servicing other than
cleaning and user maintenance shall be performed by an authorized
service representative:
Z Do not immerse base in water or try to disassemble.
Z Do not put the appliance or any individual parts in the
dishwasher.
Z Check voltage to be sure that the voltage indicated on the
name plate complies with your voltage. The name plate is
located on the underside of the appliance.
Z Never use warm or hot water to fill the water container. Use
cold water only.
Z Keep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
Z Keep children away.
Z Do not touch any hot parts. Use the handles or knobs
provided.
Z Ensure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
J WARNING
J CAUTION
IMPORTANT SAFEGUARDS
Z Never clean with scouring powders or hard implements.
Z Ensure that the ventilation slots are not covered.
Z Never pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
Z Never fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
Z Never fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
Z Never fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
Z Never fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
Z Never fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
Z Never use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
Z Never do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
NOTICE
NEVER DO
(or you will void your
warranty protection):
Control elements
Control elements
max.
2X
J HOT
J HOT
J HOT
Control elements
On/Off button Q
Multi-function buttons (button function
depends on what is shown in the display)
Display
Milk system with fine foam frother
Height-adjustable coffee spout
Hot-water nozzle
Coffee grounds container
Cup platform
Drip tray
Power cord (permanently connected or
plug-in)(back of the machine)
Water tank
Water tank cover
Bean container with aroma preservation
cover
Service socket for optionally available
JURA WiFi Connect
Filler funnel for ground coffee
Filler funnel cover
Grinder adjustment switch
Container for milk system cleaning
Measuring spoon for ground coffee
6
Preparing and using for the first time
Preparing and using for the first time
When setting up your E8, please note the following:
U
Choose a spot for your E8 which protects the machine against
overheating� Ensure that the ventilation slots are not covered�
U
Place the E8 on a horizontal surface that is not sensitive to
water�
Coffee beans which have been treated with additives (e�g� sugar),
ground coffee or freeze-dried coffee will damage the grinder�
T Only use roasted, untreated coffee beans to fill the bean
container�
T Remove the aroma preservation cover�
T Remove any dirt or foreign objects from inside the bean
container�
T Fill the bean container with coffee beans and close the aroma
preservation cover�
When you use the machine for the first time, you must set the water
hardness� If you do not know the hardness of your water, you can
find this out first� Use the Aquadur® test strips supplied with the
machine�
T Hold the test strip under flowing water for one second� Shake
off the water�
T Wait for about 1minute�
T You will then be able to read the degree of water hardness from
the discoloration of the Aquadur® test strip and the
description on the packaging�
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness
Preparing and using for the first time
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53�4 None
Soft water > 4 > 4 > 71 1
Hard water > 8�4 > 8�4 > 150 2
Very hard water > 14 > 14 > 250 3
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock�
T Never use a machine which is damaged�
T Never use a machine which has a defective power cord�
Milk, sparkling mineral water or other liquids can damage the
water tank or the machine�
T Only fill the water tank with fresh, cold water�
E The water volume is given as standard in ‘oz’� You can
change this setting to ‘ml’ in programming mode (see
Chapter 6 ‘Permanent settings in programming mode’)�
Precondition:The bean container has been filled�
T For machines with a plug-in power cord: Connect the power
cord to the machine�
T Insert the power plug into a power socket�
T Press the On/Off button Q to switch the E8 on�
‘Choose language’
T Press the 0 or 9 button until the desired language is displayed,
e�g� ‘English’�
T Press the ‘Save’ button�
‘Saved’ appears briefly on the display�
‘Water hardness’
E If you do not know the hardness of your water, you must
find this out first (see chapter 3 ‘Preparing and using for the
first time – Determining the water hardness’)�
First-time use
J WARNING
NOTICE
Preparing and using for the first time
T Press the 0 or 9 button to change the setting for the water
hardness�
T Press the ‘Save’ button�
‘Saved’
‘Filter operation’ / ‘Insert filter’
T Remove the water tank and rinse it with cold water�
T Fit the filter cartridge extension supplied on top of the CLEARYL
Smart filter cartridge�
T Insert the filter cartridge with its extension into the water tank�
T Turn the filter cartridge clockwise until it audibly clicks into
place�
T Fill the water tank with fresh, cold water and reinsert the tank�
E The machine automatically detects that you have just
inserted the filter cartridge�
‘Saved’
‘Filter is being rinsed’
‘System is filling’
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put them
back into the machine�
T Place one receptacle under the coffee spout and another under
the fine foam frother�
‘Rinse the coffee system’
‘Rinse the milk system’
‘Connect accessory’
T Touch ‘Connect’ to connect your E8 to your network�
T If necessary, scan the QR code with your mobile device to down-
load the JURA app (J�O�E�
®
)�
T Touch ‘Connect’�
The start screen is displayed� Your E8 is ready for use�
E8
E8
Preparing and using for the first time
You can manage your E8 with the JURA Cockpit. Press
the f button to enter the JURA Cockpit�
Symbol Meaning
c
‘Maintenance status’ section
f
‘Machine setting’ section
h
‘Smart mode’ active
4 (white)
Your E8 is connected with the network via JURA
WiFi Connect�
4 (red)
No connection to the WiFi network
$
Filter mode
Your E8 creates fine, creamy, feather-light milk foam with a perfect
consistency� The most important requirement for frothing milk is
a milk temperature of 39–46 °F (4–8 °C)� We would therefore
recommend using a milk cooler or a milk container�
T Remove the protective cover from the fine foam frother�
T Connect the milk pipe to the fine foam frother�
E Your E8 is equipped with the HP milk system�
T Connect the other end of the milk pipe to a milk container or a
milk cooler�
Your E8 can be connected with your Cool Control milk cooler�
E The WiFi Connect can be protected against unauthorised
access using a PIN� Activate the PIN function via the JURA
app� You will find more information at jura.com/wifi�
Precondition: The JURA WiFi Connect is inserted into the service
socket of your E8�
T Press the f button�
T Press the f button�
T Press the ^ button�
T Press the ‘Connections’ button�
T Press the ‘Connect accessory’ button�
T Press the ‘Connect’ button�
T Now follow the instructions on the display�
Managing your E – the
JURA Cockpit
c
4
Connecting milk
E8
E8
Connecting the Cool Control
milk cooler (wirelessly)
Preparing and using for the first time
Your E8 can be connected with your JURA app (J�O�E�®)�
E The WiFi Connect can be protected against unauthorised
access using a PIN� Activate the PIN function via the JURA
app� You will find more information at jura.com/wifi�
Precondition: J�O�E�® is installed on your mobile end device and
you have logged into your home network� The JURA WiFi Connect
is inserted into the service socket of your E8�
T Press the f button�
T Press the f button�
T Press the ^ button�
T Press the ‘Connections’ button�
T Press the ‘Wi-Fi connection’ button�
T Press the ‘Connect’ button�
T Now follow the instructions on the display�
Connecting the machine to
the WiFi network
Preparation
Preparation
Hot coffee, hot steam and hot water can cause scalding� Scalding
is a serious burn�
T Use extreme care when handling hot liquid or steam�
T Allow liquid to cool down before drinking�
T In the event of scalding, rinse affected area with cold water and
seek medical attention�
T Keep children AWAY�
Basic information about preparing drinks:
Aim What to do
Change the coffee strength of
a single product
Press the 9 or 0 button during
grinding
Change the amount for a
single product
Press the 9 or 0 button during
preparation
E The longer you press the 9 and 0 buttons, the faster your
setting changes�
Aim What to do
Permanently save the
amount for a single product
Press ‘Save’ straight after
preparation
Change the amount, coffee
strength and temperature
for any given product
Press the button for a product
for two seconds and configure
the settings
Display more products
Press the ^ button to display the
next product page
Prepare two specialty coffees Press the preparation button
twice within two seconds
Stop preparation Press the ‘Cancel’ button
E The water volume is given as standard in ‘oz’� You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for
amount of water’)�
Coffee tastes best served hot� A cold porcelain cup cools the
beverage – and impairs the taste� We therefore recommend
J WARNING
Preparation
prewarming the cups� You can purchase a JURA Cup Warmer
from your specialized dealer�
Press the f button for two seconds to initiate Specialty Selection:
Specialty Selection Meaning
‘Extra Shot’ s
(cappuccino, flat white,
latte macchiato)
The product is prepared with two
brewing operations, each with half the
amount of water – for a specialty
coffee with a particularly intense taste�
‘Ground coffee’ £
The product is prepared with ground
coffee�
E If you press your preselection briefly, the next product will
be prepared according to your preselection�
E If you press and hold your preselection (for two seconds), the
preselection will be active until you switch off your E8�
Example:Coffee
T Place a cup under the coffee spout�
T Press the ‘Coffee’ button�
The preset amount of water for coffee flows into the cup�
Your E8 prepares the following specialty coffees with milk at the
touch of a button:
U
Cortado
U
Latte macchiato
U
Macchiato
U
Flat White
U
Cappuccino
Example:Latte macchiato
Precondition:Milk is connected to the fine foam frother�
Preparation with
preselection (Specialty
Selection)
Espresso and coffee
E8
E8
Latte macchiato, cappuccino
and other specialty coffees
with milk
Preparation
T Place a glass under the fine foam frother�
T Press the ‘Latte Macchiato’ button�
The preset amount of milk foam flows into the glass�
E There is a short interval while the hot milk separates from
the milk foam� This allows the typical layers of a latte
macchiato to form�
The preset amount of water for espresso flows into the glass�
To ensure that the fine foam frother always works properly, you must
clean it daily when you have been preparing milk (see chapter 7
‘Maintenance – Cleaning the milk system’)�
For the ‘Caffè Barista’ and ‘Americano’, the E8 blends the coffee with
hot water using a special preparation method� This results in a
full-bodied specialty coffee which is particularly easy to digest� You
can change the amount of this additional water (see chapter 4
‘Preparation – Adjusting the product settings’)�
‘Doppio’ is Italian for ‘double’� When you select Espresso doppio,
two espressi are prepared one after the other� The result is an extra
full-bodied and aromatic specialty coffee�
You can choose to use a second coffee variety, for example
decaffeinated coffee, with the filter funnel for ground coffee�
Basic information about ground coffee:
U
Never add more than two level measuring spoons of ground
coffee�
U
Use ground coffee which is not ground too finely� Very fine
coffee can block up the system so that the coffee only comes
out in drips�
U
If you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and the
E8 stops the operation�
U
The desired specialty coffee must be prepared within
approximately one minute after filling with the ground coffee�
Otherwise the E8 stops the operation and is once more ready
for use�
U
All specialty coffees with ground coffee are always prepared
following the same model�
E8
E8
Caffè Barista and Americano
Espresso doppio
Ground coffee
Preparation
Example:Proceed as follows to prepare one espresso using ground
coffee�
T Place an espresso cup under the coffee spout�
T Press the f button for two seconds to initiate Specialty
Selection�
T Press the ‘Ground coffee’ £ button�
T Press the ‘Espresso’ button�
‘Ground coffee’ / ‘Please add ground coffee’
T Open the powder chute cover�
T Place one level measuring spoon of ground coffee into the filler
funnel�
T Close the cover of the filler funnel�
T Press the ‘Next’ button�
The preset amount of water for espresso flows into the cup�
There is a danger of scalding from hot water splashes�
T Avoid direct contact with the skin�
T Place a cup under the hot-water spout�
T Press the ‘Hot water’ button�
The preset amount of water flows into the cup�
You can adjust the grinder to suit the degree of roast of your coffee�
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged�
T Only adjust the consistency of grind when the grinder is in
motion�
The consistency of grind is correct if the coffee flows regularly from
the coffee spout� In addition a fine, thick crema forms�
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso�
T Place a cup under the coffee spout�
max.
2X
Hot water
J
CAUTION
E8
E8
Adjusting the grinder
NOTICE
Preparation
T Open the cover of the filler funnel for ground coffee�
T Press the ‘Espresso’ button to start preparation�
T Turn the grinder adjustment switch to the desired position
while the grinder is in motion�
The preset amount of water flows into the cup�
T Close the filler funnel cover�
Press the button of a product on the start screen for about two
seconds to view the list of settings (‘Product settings’)�
Permanent settings in programming mode always follow the same
model�
Example:Proceed as follows to change the coffee strength for one
coffee�
T Press the ‘Coffee’ button for about two seconds.
T Press the ‘Product settings’ button�
‘Coffee strength’ ö ä ä
T Press the buttons on the left and right of ö ä ä to change the
product settings ‘Amount’ and ‘Temperature’�
T Press the 0 or 9 button to change the setting�
T Press the ‘Save’ button�
T Press the R button to return to the start screen�
max.
2X
Adjusting the product
settings
Daily operation
Daily operation
T Place one receptacle under the coffee spout and another under
the fine foam frother�
T Press the On/Off button Q�
E When the machine is switched off, the system is only rinsed
if a specialty coffee has been prepared�
E If milk has been prepared before switching off, you will be
prompted to perform milk system cleaning (‘Clean the milk
system’)� After 30 seconds the switch-off process continues
automatically�
The spouts are rinsed�
Your E8 is switched on or off�
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time� You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the
water tank or the machine�
T Only fill the water tank with fresh, cold water�
T Open the water tank cover�
T Remove the water tank and rinse it with cold water�
T Fill the water tank with fresh, cold water and reinsert the tank�
T Close the water tank cover�
Optimal coffee quality depends on many factors� One important
prerequisite is regular maintenance of your E8� Carry out the
following steps:
Maintenance action Daily If necessary Note
Empty the drip tray and
coffee grounds container and
rinse with warm water
(The insert for the drip tray,
including the drip tray itself,
and the coffee grounds
container are dishwasher-safe)
x Always empty the coffee grounds
container when the machine is switched
on� This is the only way of resetting the
coffee grounds counter�
Switching the machine on
and off
E8
E8
Filling the water tank
NOTICE
Maintenance actions
Daily operation
Maintenance action Daily If necessary Note
Clean the fine foam frother
(if heavily soiled, also
dismantle it)
x (see chapter 7 ‘Maintenance –
Dismantling and rinsing the
fine foam frother’)
Rinse the milk pipe x –
Rinse the water tank x –
Wipe the surface of the
machine with a clean, soft,
damp cloth (e�g� microfiber
cloth)
x –
Change the milk pipe HP3 approx�
every
3 months
–
Change the interchangeable
milk spout CX3
approx�
every
3 months
–
Clean the inside of the water
tank with a brush
x –
Clean the top and bottom of
the cup platform
x –
E You will find more information about maintenance of your
E8 in the ‘Maintenance status’ c section in the program
item ‘Information’
Machine settings
Machine settings
Hot coffee, hot steam and hot water can cause scalding� Scalding
is a serious burn�
T Use extreme care when handling hot liquid or steam�
T Allow liquid to cool down before drinking�
T In the event of scalding, rinse affected area with cold water an
seek medical attention�
T Keep children AWAY�
Press the f button to enter the Cockpit� In the ‘Machine setting’ f
section, you can make the following settings:
Program item Explanation
‘Choose language’ Set language
‘Switch off after’ Set the automatic switch-off time to save energy (switch-off after
15minutes, 30minutes or 1 – 9 hours after the last action on the machine)
‘Water hardness’ Set the hardness of the water used (1°dH to 30°dH) to prevent calcifica-
tion of your machine�
‘Units’ Set the unit for the amount of water (ml or oz)
‘Product name’ Display product images with/without product names on the start screen
‘Smart mode’ Arrange products by preparation frequency on the start screen after a
certain amount of time (the h symbol in the Cockpit shows that ‘Smart
mode’ is activated)
‘Number of products’ Set the number of products on the start screen (two or four)
‘Connections’,
‘Connect accessory’
Connect wirelessly to a JURA accessory or disconnect again
(see chapter 3 ‘Preparing and using for the first time – Connecting the
Cool Control milk cooler (wirelessly)’)
‘Connections’,
‘Wi-Fi connection’
Wirelessly connect your E8 with the JURA app (J�O�E�
®
) or disconnect
again (see chapter 3 ‘Preparing and using for the first time – Connecting
the machine to the WiFi network’)
‘Factory setting’ Restore factory settings (your E8 will switch off after this)
‘Rinse the milk
system’
Automatic: Milk system rinsing starts automatically 15 minutes after
preparation of a specialty coffee with milk�
Manual: The milk system rinsing can be initiated manually via the Cockpit
in the c section (see chapter 7 ‘Maintenance – Rinsing the milk system’)�
‘Version’ View software version
‘Empty system’ Empty the system to protect the E8 from frost during transport (see
chapter 10 ‘Transport and environmentally friendly disposal – Transport/
Emptying the system’)
J WARNING
Maintenance
Maintenance
Use of maintenance products that are harmful to health and
discharge of liquids during maintenance program� Harmful if
swallowed� Irritating to eyes and skin�
T Keep children AWAY�
T Keep children away from the machine while it is performing a
maintenance program�
T Avoid contact with skin and eyes�
T Avoid generation of dust� Do not inhale dust�
T When using do not eat or drink�
T Keep maintenance products away from food, drink and
animal food�
T Keep container tightly closed and dry� Keep in a cool place�
Basic information about maintenance:
U
Press the f button to enter the Cockpit� This area consists of a
‘Maintenance status’ c section and a ‘Machine setting’ f
section� You can manage the maintenance of your E8 in the
c section�
U
If a maintenance program needs to be initiated, the f symbol
appears with a red background� Press the f button to enter the
Cockpit� The Cockpit shows maintenance programs that need to
be carried out in the form of messages with red backgrounds�
Press the button that corresponds to the message to go straight
to the maintenance program� Maintenance programs that are
due imminently are indicated on your E8 by means of a bar
display within the message�
U
Carry out each maintenance program when you are prompted
to do so�
You can start coffee system rinsing manually at any time�
Precondition:The start screen is displayed�
T Place a receptacle under the coffee spout�
T Press the f button�
T Press the c button�
T Press the ‘Rinse the coffee system’ button to start the rinse
operation�
The operation stops automatically�
J WARNING
Rinsing the machine
E8
E8
Maintenance
After each milk preparation, the E8 prompts you to perform a milk
system rinse�
In the machine settings, you can set whether the milk system
rinsing is to be initiated manually or automatically 15 minutes after
preparation (see chapter 6 ‘Machine settings’)�
Precondition:The start screen is displayed��
T Place a receptacle under the fine foam frother�
T Press the f button�
T Press the c button�
T Press the ‘Rinse the milk system’ button to start the rinse
operation�
The fine foam frother is rinsed�
The fine foam frother must be cleaned daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene�
Non-recommended cleaning agents will not optimally remove
milk residues� This may cause the cappuccino frother to become
blocked and fly off the machine� Discharge of hot steam�
T Use only original JURA milk system cleaner�
Harmful and irritating cleaning agent� Harmful if swallowed�
Irritating to eyes and skin�
T Keep children AWAY�
T Avoid contact with skin and eyes�
T After contact with skin, wash immediately with plenty of water�
In case of skin irritation, seek medical advice�
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice�
T If swallowed, rinse mouth immediately and drink large
quantities of water� Do not induce vomiting� Seek medical
advice immediately and show label�
E JURA milk system cleaner is available from specialized
dealers�
E To clean the milk system, use the included container for milk
system cleaning�
Precondition:The start screen is displayed�
T Press the f button�
Rinsing the milk system
E8
E8
Cleaning the milk system
J WARNING
J WARNING
Maintenance
T Press the ‘Clean the milk system’ button�
T Press the ‘Start’ button�
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or milk cooler�
T Pour one dosing unit of milk system cleaner into the container
for milk system cleaning�
T Place the container under the hot-water spout and the fine
foam frother and connect the milk pipe with the container�
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector�
T Press the ‘Next’ button�
The fine foam frother and the milk pipe are cleaned�
The operation stops automatically�
If insufficient foam is produced when the milk is frothed or milk
sprays out of the fine foam frother, the frother may be clogged� If
this happens, dismantle and rinse the fine foam frother�
T Remove the milk pipe and rinse it thoroughly under running
water�
T Remove the fine foam frother�
T Dismantle the fine foam frother into its individual parts�
T Rinse all the parts under running water� If there are severely
dried-on milk residues, first immerse the individual parts in a
solution of 8�5 oz (250ml) water and one dosing unit of JURA
milk system cleaner� Then rinse the individual parts thoroughly�
6
E8
E8
6
Dismantling and rinsing the
fine foam frother
E8
E8
1
2
Maintenance
T Re-assemble the fine foam frother�
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation�
T Re-fit the fine foam frother on the milk system�
Once the filter cartridge stops working (depending on the water
hardness setting), the E8 will prompt you to change the filter�
E Your E8 no longer has to be descaled if you are using the
CLEARYL Smart filter cartridge�
E CLEARYL Smart filter cartridges are available from specialized
dealers�
Precondition:The start screen is displayed� (Alternatively, the filter
symbol $ is displayed in red in the Cockpit if the filter capacity is
used�)
T Remove and empty the water tank�
T Turn the filter cartridge counterclockwise and remove it along
with the extension from the water tank�
T Fit the filter cartridge extension on top of a new CLEARYL Smart
filter cartridge�
T Insert the filter cartridge with its extension into the water tank�
T Turn the filter cartridge clockwise until it audibly clicks into
place�
T Fill the water tank with fresh, cold water and reinsert the tank�
The machine automatically detects that you have just inserted/
changed the filter cartridge�
‘Filter is being rinsed’
The start screen is displayed�
E8
E8
E8
E8
Inserting/changing the filter
Maintenance
After 180preparations or 80switch-on rinses, the E8 will prompt you
to clean it�
Non-recommended (e�g� liquid) cleaning agents may contain
substances that could damage the machine or leave residues�
T Use only original JURA cleaning tablets� These are specially
formulated for your machine�
Harmful and irritating cleaning agent� Harmful if swallowed�
Irritating to eyes and skin�
T Keep children AWAY�
T Avoid contact with skin and eyes�
T Avoid generation of dust� Do not inhale dust�
T After contact with skin, wash immediately with plenty of water�
In case of skin irritation, seek medical advice�
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice�
T If swallowed, rinse mouth immediately and drink large
quantities of water� Do not induce vomiting� Seek medical
advice immediately and show label�
E The cleaning program lasts approximately 20 minutes�
E Do not interrupt the cleaning program� The quality of
cleaning will be impaired if you do so�
E JURA cleaning tablets are available from specialized dealers�
Precondition:‘Clean’ is displayed in the Cockpit�
T Press the ‘Clean’ button�
T Press the ‘Start’ button�
‘Empty grounds’
T Empty the drip tray and coffee grounds container and put them
back into the machine�
‘Clean’
T Place one receptacle under the coffee spout and another under
the fine foam frother�
T Press the ‘Next’ button�
Water flows out of the coffee spout and the fine foam frother�
The operation is interrupted, ‘Add cleaning tablet’�
T Open the cover of the filler funnel for ground coffee�
Cleaning the machine
J WARNING
J WARNING
E8
E8
Maintenance
T Insert a JURA cleaning tablet into the filler funnel�
T Close the filler funnel cover�
T Press the ‘Next’ button�
Water flows repeatedly out of the coffee spout and the fine
foam frother�
‘Empty grounds’
T Empty the drip tray and coffee grounds container and put them
back into the machine�
The E8 builds up deposits of limescale over time and automatically
prompts you to descale it when necessary� The degree of
calcification depends on the hardness of your water�
E If you are using a CLEARYL Smart filter cartridge, you will not
be prompted to descale�
Non-recommended descaling agents (e�g� vinegar) may contain
substances that could damage the machine or leave residues�
T Use only original JURA descaling tablets� These are formulated
especially for your machine�
Harmful and irritating descaling agent� Harmful if swallowed�
Irritating to eyes and skin�
T Keep children AWAY�
T Avoid contact with skin and eyes�
T Avoid generation of dust� Do not inhale dust�
T After contact with skin, wash immediately with plenty of water�
In case of skin irritation, seek medical advice�
T After eye contact, immediately flush eyes with plenty of water�
Remove contact lenses� Seek medical advice�
T If swallowed, rinse mouth immediately and drink large
quantities of water� Do not induce vomiting� Seek medical
advice immediately and show label�
If the descaling operation is interrupted, there may be damage to
the machine�
T Allow the descaling program to run to the end�
E The descaling program lasts approximately 40minutes�
E JURA descaling tablets are available from specialized dealers�
E If the descaling agent comes into contact with sensitive
surfaces (e�g� marble), damage cannot be ruled out� Clean up
any splashes immediately�
max.
2X
Descaling the machine
J WARNING
J WARNING J WARNING
NOTICE
Maintenance
Precondition:‘Descale’ is displayed in the Cockpit�
T Press the ‘Descale’ button�
T Press the ‘Start’ button�
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put them
back into the machine�
‘Agent in tank’
T Remove and empty the water tank�
T Completely dissolve 3JURA descaling tablets in a receptacle
holding 17 oz (500ml) of water� This may take several minutes�
T Pour the solution into the empty water tank and insert it into
the machine�
T Place a receptacle under the hot-water nozzle�
T Press the ‘Next’ button�
Water flows repeatedly out of the hot-water nozzle�
‘Empty drip tray’�
T Empty the drip tray and coffee grounds container and put them
back into the machine�
‘Rinse the water tank’ / ‘Fill water tank’
T Empty the receptacle and place it under the coffee spout and
hot-water spout again�
T Remove the water tank and rinse it thoroughly�
T Fill the water tank with fresh, cold water and reinsert the tank�
T Press the ‘Next’ button�
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put them
back into the machine�
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly�
3x
E8
E8
E8
E8
Maintenance
Limescale deposits may form in the water tank� To ensure correct
function of the machine, descale the water tank from time to time�
T Remove the water tank�
T If you use a CLEARYL Smart filter cartridge, remove this�
T Completely fill the water tank and dissolve 3 JURA descaling
tablets in it�
T Leave the water tank with the descaling solution for several
hours (e�g� overnight)�
T Empty the water tank and rinse it thoroughly�
T If you use a CLEARYL Smart filter cartridge, insert this again�
T Fill the water tank with fresh, cold water and reinsert the tank�
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container� These traces may negatively affect
the coffee result� For this reason clean the bean container from time
to time�
Precondition:‘Fill bean container’ is displayed�
T Switch the machine off with the On/Off button Q�
T Remove the aroma preservation cover�
T Clean the bean container with a soft, dry cloth�
T Fill the bean container with coffee beans and close the aroma
preservation cover�
Descaling the water tank
Cleaning the bean container
Display messages
Display messages
Messages on the start screen
Message Cause/Result Action
‘Fill water tank’ The water tank is empty� You
cannot prepare any products�
T Fill the water tank (see chapter 5
‘Daily operation – Filling the
water tank’)�
‘Empty grounds’ /
‘Empty drip tray’
The coffee grounds container is
full� / The drip tray is full� You
cannot prepare any products�
T Empty the coffee grounds
container and the drip tray
(see chapter 5 ‘Daily operation –
Maintenance actions’)�
‘Drip tray not fitted’ The drip tray is not inserted
correctly or is not inserted at all�
You cannot prepare any products�
T Fit the drip tray�
‘Fill bean container’ The bean container is empty� You
cannot prepare any specialty
coffees, but you can prepare hot
water and milk�
T Fill the bean container (see
chapter 3 ‘Preparing and using
for the first time – Filling the
bean container’)�
‘Too hot’ The system is too hot to start a
maintenance program�
T Wait for several minutes until
the system has cooled or prepare
a specialty coffee or hot water�
Messages in the Cockpit
Message Cause/Result Action
The filter
symbol $ lights
up red�
‘Filter’
The filter capacity is used�
T Replace the CLEARYL Smart filter cartridge (see
chapter 7 ‘Maintenance – Inserting/changing the
filter’)�
‘Clean’ The E8 is prompting you
to clean it�
T Perform cleaning (see chapter 7 ‘Maintenance –
Cleaning the machine’)�
‘Descale’ The E8 is prompting you
to descale it�
T Perform descaling (see chapter 7 ‘Maintenance –
Descaling the machine ’)�
‘Clean the milk
system’
The E8 prompts you to
clean the milk system�
T Perform milk system cleaning (see chapter 7
‘Maintenance – Cleaning the milk system’)�
Troubleshooting
Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the
milk is frothed or milk
sprays out of the fine
foam frother�
The fine foam frother is
dirty�
T Clean the fine foam frother (see chapter 7
‘Maintenance – Cleaning the milk system’)�
T Dismantle and rinse the fine foam frother
(see chapter 7 ‘Maintenance – Dismantling
and rinsing the fine foam frother’)�
Coffee only comes out
in drips when it is being
prepared�
The coffee is ground
too finely and obstructs
the system� The water
hardness may not have
been correctly set�
T Set the grinder to a coarser setting (see
chapter 4 ‘Preparation – Adjusting the
grinder’)�
T Perform descaling (see chapter 7
‘Maintenance – Descaling the machine ’)�
There is dry ground
coffee behind the coffee
grounds container�
The beans used are
resulting in an above
average volume of
ground coffee�
T Reduce the coffee strength or choose a
finer grinder setting (see chapter 4
‘Preparation – Adjusting the product
settings’)�
‘Fill water tank’ is not
displayed, even though
the water tank is empty�
There is a lot of
limescale in the water
tank�
T Descale the water tank (see chapter 7
‘Maintenance – Descaling the water tank’)�
Little or no water or
steam comes out of the
fine foam frother� The
pump is very quiet�
The connector of the
fine foam frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling�
T Remove the fine foam frother�
T Unscrew the black connector with the aid
of the hexagonal hole on the measuring
spoon for ground coffee�
T Clean the connector thoroughly�
T Screw the connector back on tightly by hand�
Grinder is making a
very loud noise�
There are foreign
objects in the grinder�
T Contact customer support in your country
(see chapter 13 ‘JURA contact details/ Legal
information’)�
‘ERROR2’ or ‘ERROR5’
is displayed�
If the machine has been
exposed to the cold for a
long period of time,
heating may be disabled
for safety reasons�
T Warm the machine at room temperature�
Other ‘ERROR’ mes-
sages are displayed�
–
T Contact customer support in your country
(see chapter 13 ‘JURA contact details/ Legal
information’)�
E If you were unable to solve the problem, contact customer
support in your country (see chapter 13 ‘JURA contact
details/ Legal information’)�
Transport and environmentally friendly disposal
Transport and environmentally friendly disposal
Keep the packaging for your E8� It should be used to protect the
machine during transport�
In order to protect the E8 from frost during transport, the system
must be emptied�
Precondition:The start screen is displayed�
T Place a receptacle under the hot-water nozzle�
T Press the f button�
T Press the f button again�
T Press the ^ button several times until the program item ‘Empty
system’ is displayed�
T Press the ‘Empty system’ button�
T Remove and empty the water tank�
‘System is emptying’
Steam will continue to be discharged from the hot-water nozzle
until the system is empty� Your E8 is switched off�
Please dispose of old machines in an environmentally neutral way�
H
Transport/ Emptying the
system
E8
E8
Disposal
Technical data
Technical data
Voltage 120V~, 60Hz
Power 1450W
Conformity mark
Pump pressure static, max� 15bar
Holding capacity of water
tank (without filter)
64 oz
(1�9l)
Holding capacity of bean
container
10 oz
(280g)
Holding capacity of coffee
grounds container
max� 16 portions
Cord length approx� 47 in�
(approx� 1�2 m)
Weight approx� 21�2 lb
(approx� 9�6kg)
Dimensions (W×H×D) 11�0 × 13�8 × 17�6in�
(28�0 × 35�1 × 44�6cm)
JURA Type 760
The machine complies with the following directives:
U
Standard UL 1082
U
Canadian Standard CSA C22�2 No� 64
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC Rules�
Directives
FCC Rules
Index
Index
A
Addresses 40
Adjusting the product settings 19
Aroma preservation cover
Bean container with aroma preservation
cover 9
B
Bean container
Bean container with aroma preservation
cover 9
Cleaning 30
Filling 10
Bus bar
Technical data 34
Button
On/Off button 9
Bypass amount of water 17
C
Caffè Barista 17
Cappuccino 16
Cappuccino frother rinsing
Rinsing the milk system 24
Cleaning
Bean container 30
Machine 27
CLEARYL Smart filter cartridge
Changing 26
Inserting 26
Cockpit 22, 23
Coffee 16
Coffee grounds container 9
Coffee spout
Height-adjustable coffee spout 9
Connect accessory 13, 22
Consistency of grind
Adjusting the grinder 18
Grinder adjustment switch 9
Contact details 40
Cortado 16
Cover
Filler funnel for ground coffee 9
Water tank 9
Cup platform 9
Customer support 40
D
Descaling
Machine 28
Water tank 30
Display 9
Display messages 31
Disposal 33
Drip tray 9
E
Emptying the system 33
Errors
Troubleshooting 32
Espresso 16
Espresso doppio 17
F
Filler funnel
Filler funnel for ground coffee 9
Filling
Bean container 10
Water tank 20
Filter
Changing 26
Inserting 26
Fine foam frother 9
Dismantling and rinsing 25
First-time use 11
Flat White 16
G
Grinder adjustment switch 9
Ground coffee 17
Measuring spoon for ground coffee 9
H
Height-adjustable coffee spout 9
Hotline 40
Hot water 18
I
Important safeguards
Safety 4
Instant coffee
Ground coffee 17
Index
J
JURA
Contact details 40
L
Latte macchiato 16
M
Machine
Cleaning 27
Descaling 28
Rinsing 23
Setting up 10
Machine settings 22
Maintenance 23
Maintenance actions 20
Measuring spoon for ground coffee 9
Messages, display 31
Milk
Connecting milk 13
Milk system
Clean 24
Fine foam frother 9
Rinsing 24
P
Power cord 9
Preparation 15, 16
Americano 17
Cappuccino 16
Coffee 16
Cortado 16
Espresso 16
Espresso doppio 17
Flat White 16
Ground coffee 17
Hot water 18
Latte macchiato 16
Macchiato 16
Specialty Selection 16
Problems
Troubleshooting 32
Product settings
Adjusting 19
R
Rinsing
Machine 23
S
Safety
Important safeguards 4
Service socket 9
Setting up
Setting up the machine 10
Specialty Selection
Extra Shot 16
Ground coffee 16
Switching off 20
Switching on 20
T
Technical data 34
Tel 40
Transport 33
Troubleshooting 32
U
Use, first time 11
W
Water hardness
Determining the water hardness 10
Water tank 9
Descaling 30
Filling 20
WiFi Connect 9, 13, 14, 22
WiFi network 14, 22
Wireless connection 11, 13, 22
JURA contact details/ Legal information
JURA contact details/ Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Switzerland
USA: JURA Inc.
Canada: FAEMA
Customer Service
Phone
E-Mail
1-800-220-5701
info@us�jura�com
1-(855)-544-8600
info@juracanada�ca
Opening Hours (EST) Mon – Thu 9 am – 9 pm,
Fri 9 am – 8 pm,
Sat 9 am – 5 pm
Distributor Address
Phone
Fax
20 Craig Road
Montvale, NJ 07645
001 (201) 767-3999
001 (201) 767-9684
115 Matheson Boulevard East
Mississauga, Ontario, L4Z 1X8
1-(905)-501-8600
Internet us�jura�com ca�jura�com
@ You will find additional contact details for your country at
jura.com�
We reserve the right to make technical changes� The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colors of the machine� Some details of
your E8 may vary�
Your opinion is important to us! Use the contact details at
jura.com�
The instructions for use contain information which is protected by
copyright� It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG�
Technical changes
Feedback
Copyright
J74564/E8
(NAA)
/US-en/202103
