Loading ...
Loading ...
Loading ...
4
Installation
7. Turn on the power to the Micro HDMI source and HDMI display. The
green RJ45 LEDs on the transmitter and receiver units will illuminate
to indicate they are receiving power. The orange RJ45 LEDs on the
transmitter and receiver units will illuminate to indicate they are
receiving a signal from the source.
8. If necessary, adjust the Equalization control on the receiver unit to
improve the video image.
Note: An improper Equalization setting can cause the monitor not to display a
picture at all. Try each Equalization setting until an acceptable image is displayed.
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions, try the troubleshooting tips below.
1. Are the USB Micro-B cables that came with the product connected
and plugged into a working power source? For the product to
function properly, the transmitter and receiver must be connected to and
receiving power from the USB Micro-B cables.
2. Was the power to the Micro HDMI source turned off prior to
installation? If not, restart.
3. What resolution are you trying to reach? See the Product Features
and Installation sections in this manual for details on maximum
distance and resolution. The shorter the extension distance, the higher
the resolution you will be able to obtain. If you are not able to get an
acceptable image, try lowering your computer’s video resolution or
adjusting the refresh rate.
4. What type of cabling are you using? Inferior cabling can result in poor
performance, so it is important you use cables that can support the
video resolution you are trying to obtain. To achieve maximum distance
and resolution, 24 AWG solid-wire UTP cable (such as Tripp Lite’s N202-
Series cables) must be used.
15-10-238-933517-EN.indd 4 11/9/2015 10:24:08 AM
Loading ...
Loading ...
Loading ...