Loading ...
Loading ...
Loading ...
25
OVEN CONTROLS
Setting Convection Convert
Convection convert automatically converts a standard
baking recipe for convection baking. When set properly, this
feature is designed to display the actual converted
(reduced) temperature in the display. Convection convert
may only be used with a convection bake cooking mode. It
can be used with a delay start and bake time. If convection
conversion is used with the bake time and delay start
features, Check food (CF) will display when 75% of the
bake time has completed. At this time the oven control will
sound three long beeps at regular intervals until baking time
is finished. The control will display End and continue to
beep at regular intervals until off is pressed.
To set the oven for convection bake with a standard
baking recipe temperature of 400°F (204ºC):
1. Arrange the interior oven racks.
2. Press convect. Convect and bake will flash and 350º
will appear in the display.
3. Press 4 0 0. Convect and bake will keep flashing and
400º will appear in the display.
4. Press start.
5. Set bake time or delay start if needed. See “Setting
Delay Start” on page 26 and “Setting Bake Time” on
page 25.
6. Press convect convert, and the oven will start heating.
The temperature displayed will be 25°F (14ºC) lower
than what it was. The actual oven temperature and the
fan icon will be displayed. A beep will sound once the
oven temperature reaches 375°F, and the display will
show 375º, CONVECT, BAKE, and the fan icon.
7. Place food in the oven.
Setting Bake Time
Use bake time when setting the oven to cook for a specific
length of time and shut off automatically when the time is
complete.
When cooking time ends, the oven will shut off and will
beep. This feature can be used with bake, convection bake,
convection roast, and slow cook modes.
To program the oven to begin baking immediately and
to shut off automatically (example: Bake at 350°F for 30
minutes):
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the
oven.
3. Press bake. The display will show 350º.
4. Press start. The actual oven temperature will appear in
the display.
5. Press bake time. -- -- will appear in the display.
6. Enter the desired baking time by pressing 3 0.
7. Press start. Once the timed bake feature has started,
the current time of day will appear in the display.
8. Press off when baking has finished or to cancel the
bake time feature at any time. A bake time of 0 minute
can also be entered to cancel the bake time feature and
keep the oven in its current cooking mode.
When the timed bake finishes:
1. End and the time of day will show in the display. The
oven will shut off automatically.
2. The control will beep 3 times every 30 seconds until off
is pressed.
Always use pot holders or oven mitts when using the
oven. When cooking the oven interior, oven racks and
cooktop will become very hot which can cause burns.
When using a bake time under 20 minutes, the convec-
tion convert will not beep and display the CF message.
Press off to cancel the feature at any time.
Bake, broil, and convection elements will cycle for better
heat distribution and faster, more even cooking.
CAUTION
NOTE
Baking time can be set for any amount of time between 1
minute to 5 hrs and 59 minutes. The time remaining can
be shown in the timer section of the display by pressing
bake time at any moment of the cooking.
Once bake time has started baking, a beep will sound
when the oven temperature reaches the set temperature.
NOTE
Loading ...
Loading ...
Loading ...