Loading ...
Loading ...
Loading ...
W415-2949 / D / 05.19.22
EN
38
finishing
9.3 glowing embers
9.4 lava rock
Tear the embers into pieces and loosely layer above the burner ports covering the burner area. Care should be
taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fi bre hairs will glow.
The ember material will only glow when exposed to direct fl ame; however, care should be taken to not
block off the burner ports.
!
WARNING
• Completely blocking the burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed
ignition.
Blocked burner ports can cause an incorrect flamme pattern, carbon deposits and delayed ignition. Logs glow
when exposed to direct flame. Use only certified glowing embers and logs available form your local authorized
dealer / distributor. See log installation leaflets for details.
9.5 media placement
note:
Ensure to keep air shutter areas free from media.
Some components have been hidden for clarity.
!
WARNING
• Do not block or close off the burner ports. Blocked ports can cause an incorrect flame pattern, carbon
deposits, and delayed ignition.
• When supplied, charcoal embers, charcoal lumps, lava rock, and vermiculite are not to be placed on the
burner.
Place lava rock on the shaded areas (i.e. the base of the burner).
Loading ...
Loading ...
Loading ...