RCF TTP 4-A OWNER’S MANUAL

Loading ...

PART 2 | 9. SUSPENDED CONFIGURATIONS

TTL C4-A, TTP C4-A, TTW C4-A

TTx C4-A models can be suspended with the use of their speciﬁc ﬂybar FLY BAR FL-B H TT 4.

To link the LINK BAR FL-B LINK TT4 to the speakers, simply proceed like linking two speakers:

raise the lateral bracket on one speaker and insert

it to the corresponding seat on the LINK BAR; then insert the lower lateral bracket of the LINK BAR into its seat on the lower speaker. Secure both

brackets by inserting the quick lock pins.The same operation must be done on both sides of the LINK BAR.

IMPORTANT NOTE: RCF highly reccommends to chek on Easy Focus Software to verify if your conﬁguration is appropriate

for your application.

IMPORTANT NOTE: The following conﬁgurations are valid for TTL C4-A, TTP C4-A, TTW C4-A only.

With the use one single ﬂybar it is possible to

suspend up to 4 modules; each one of the can

either be a TTL C4-A or a TTP C4-A (TTW C4-A

not reccommended in this conﬁguration).

The speciﬁc accessory LINK BAR FL-B LINK TT 4

must be placed between the third and the fourth

speaker only when a TTW C4-A is placed as last

speaker.

TTW C4-A

FLY BAR FL-B H TT 4

TTL C4-A or TTP C4-A TTL C4-A or TTP C4-A

Loading ...

RCF TTP 4-A NARROW DIRECTIVITY TWO-WAY SPEAKER