Loading ...
Loading ...
Loading ...
3. OPERATION INSTRUCTION
2.Spot Mode
Press the spot cleaning button, it will clean the area within 1m2 and clean by spiral mode.
It will automatic operate in around 2-3 minutes.
3. Mopping Mode
Press " " button, it will switch to mopping mode, and under this mode the vacuum cleaning mode
will stop working. (No suction power and fabric brush stop running). Mopping routes as following:
4. Lowspeed Mode
Press " " button on remote controller, the unit will switch to low speed mode, " " symbol will
not show on LED display any more. Press" “button again then will switch back to normal mode.
5. Full - Go Mode
The unit will start auto cleaning after fully charge, and will return to charging station when battery
low, and will operate after full charge and repeat again.
Setting the Full-Go Function
1.Press the “ ” button on remote control
2.And press the “
” button on remote control, the full-go“ ”
symbol display on screen, the full-go function will be activated.
3.You can press “ ” button to cancel the current setting.
4.Full-go function cannot work with Timer function. These two function have separate use.
FULL-GO
7
Loading ...
Loading ...
Loading ...