Loading ...
Loading ...
Loading ...
3. OPERATION INSTRUCTION
3.2 Cleaning/Stop/Sleep
1.Cleaning
A. Turn on power switch.
B. Press“ ”on unit or press “AUTO“on remote controller to start work.
2. Stop
Stop will switch the cleaning mode to stand-by mode, press related button on remote controller
or " " to stop, after that can be re-operated on unit.
3. Sleep
Please press " " button on remote controller when unit under stand-by mode, then unit will go on
sleep mode. Or if the unit is idle for 1 minute under stand-by mode, the unit will switch to sleep
mode automatically.
*Reminders
If the unit is under sleep mode, press " " or remote controller " " to switch on the unit.
3.3 Cleaning modes selection
1. Auto mode
The robot cleaner equipped with specific chip for robot uses dual-core chip with several built-in
sensors and motor control coprocessor and SLAM technology so that it can adjust route
automatically and detect condition with high speed. The robot cleaner finishes indoor accurate
positioning and autonomous mapping function by an interstellar map detection planning mode to
clean room more efficiently,quickly and intelligently.
6
Loading ...
Loading ...
Loading ...