DW60A8050FB/EU User Manual

Loading ...

English56

Before you start

Rinse aid level setting

You can change the amount of rinse aid applied during a cycle.

1. To select the rinse aid level setting menu. Select the “AUTO” key for 5 seconds, after the

beep followed by the reset of the “0:00” display, press the “Sanitize” key.

- The display shows the current setting. (Default setting: “F4”)

2. Press the AUTO cycle button to change the setting.

- You can select from F1 - F5 (minimum – maximum).

3. Wait 5 seconds to save the setting.

Water hardness level setting

You can change the water hardness level according to water hardness in your local area.

Changing this setting will have effect on the salt consumption in the dishwasher’s salt

storage.

1. To select the water hardness level setting menu. Select the “AUTO” button for 5 seconds,

after the beep followed by the display reset: “0:00”, press the “Delay Start” button.

- The display shows the current setting. (Default setting: “H3”)

2. Press the AUTO cycle button to change the setting.

- You can select from H1 – H6 (soft – hard).

3. Wait 5 seconds to save the setting.

NOTE

• Change the setting according to the table in the “Adjusting salt consumption” section on

page 62.

• Default Setting: H3

• The dishwasher regenerates the water softener once every 3–4 cycles depending on the

setting. However, the dishwasher will regenerate the water softener on the rst cycle

after you change the setting.

• Regeneration will be operated in dry phase with an additional 2.0–2.5 l of water being

used and 4–10 minutes taken for the cycle.

• The energy used may be increased however this should be by an insignicant amount.

DW8500AM_DW60A8070BB_EU_DD81-03206B-05_EN.indd 56 2023-06-27  5:29:10

Loading ...

Samsung DW60A8050FB/EU Series 11 Black Freestanding Dishwasher DW60A8050FB