Loading ...
Loading ...
Loading ...
English-8
PLACING THE FILTER ON THE PORTA-FILTER
1. Insert the lter into the porta-lter, making sure to align the
lter dimple to the porta-lter notch (see gure 4).
2. Turn the lter to the left or right to lock it in place (see gure 5).
NOTE: To remove the lter for cleaning, turn the lter to the
left or right to align the lter dimple to the porta-lter notch and
proceed to remove.
WARNING: Make sure the lter has cooled down before
attempting to remove it from the porta-lter.
FILLING WITH COFFEE
Place selected lter in porta-lter as follows:
FOR GROUND COFFEE:
a. Fill the lter with fresh, ne ground espresso coffee about ⅛
of an inch (3mm) from the rim (DO NOT overll).
b. Using the tamping part of the scoop, push the coffee
grounds downwards as far as the tamper will go to get your espresso grounds
compact and even.
c. Clean any excess coffee from the rim to ensure proper t under brew head.
a. b. c.
FOR E.S.E. (EASY SERVING ESPRESSO) PODS
Simply place the pod in the lter for a single shot of espresso. If there is any loose paper
from the pod sticking out from the lter, be sure to fold it inside to ensure a good seal
when brewing.
POD
Figure 5
Figure 4
BVMC-EM6701 Series_22ESM1.indd 8BVMC-EM6701 Series_22ESM1.indd 82022/2/18 下午5:462022/2/18 下午5:46
Loading ...
Loading ...
Loading ...