Loading ...
Loading ...
Loading ...
7
English
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
Contents
• Laser Information
• User Safety
• Batteries and Chargers
• Operating Tips
• Turning the Laser ON
• Checking Laser Accuracy
• Field Calibration Check
• Using the Laser
• Maintenance
• Troubleshooting
• Accessories
• Service and Repairs
• Warranty
• Specifications
LASER INFORMATION
The DCLE34031 3x360 Laser is a Class 2laser product. It is a
self-leveling laser tool that can be used for horizontal (level)
and vertical (plumb) alignmentprojects.
This product complies with 21CFR 1040.10 and 1040.11
except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No.56, dated May8, 2019.
- Conforms to UL STDS 61010-1 & 2595
- Certified to CSA STD C22.2 No. 61010-1
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identier: DCLE34031
Responsible Party – U.S. Contact Information
DEWALT
701 East Joppa Road
Towson, Maryland 21286
www.
DEWALT.com
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio and television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receivingantenna.
• Increase the separation between the equipment
andreceiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician
forhelp.
ISED Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science, and Economic
Development Canada's license-exempt RSS(s). Operation is
subject to the following twoconditions:
1. This device may not causeinterference.
2. This device must accept any interference, including
interference that may cause undesired operation of
thedevice.
USER SAFETY
Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates apotentially hazardous
situation which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates apotentially hazardous
situation which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
If you have any questions or comments about
this or any
DEWALT tool,
call 1-800-4-DEWALT (1‑800‑433‑9258)
or go to www.DEWALT.com.
WARNING: Never modify the tool or any part of it.
Damage to the laser or personal injury couldresult.
WARNING: Read and understand all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or seriousinjury.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...