Loading ...
Loading ...
Loading ...
8
EN
Proceed as follows to remove the transit bolts:
1. Use a spanner to loosen the four
transit bolts then pull them out.
2. Push the four transit bolt cover caps
provided for this purpose into the
holes.
3. Keep the transit bolts in a safe place
for future reuse.
Adjusting the levelling feet
Warning!
• The lock nuts on the four levelling feet must be tightened
against the washing machine body.
1. Check that the feet are still firmly attached to the washing
machine. If this is not the case, return them to their
original position and tighten the nuts.
2. Slacken the lock nut and turn the foot until it touches the
floor.
3. Adjust the feet and lock them into position using a
spanner. Check that the washing machine is stable.
Up
Do
wn
Foot
lock
nut
Loading ...
Loading ...
Loading ...