Loading ...
Loading ...
Loading ...
5
special guide bars that reduce the risks associated with kickback.
manufacturer or the equivalent.
guide bar.
branches, rocks, fences, stumps, etc. Eliminate or avoid any
obstruction that your saw chain could hit while you are cutting
through a particular log or branch.
dull chain can increase the chance of kickback. Check tension at
regular intervals with the motor stopped and battery removed.
speed. If the chain is moving at a slower speed, there is a greater
chance for kickback to occur.
spiked bumpers into wood and allow chain to reach full speed
before proceeding with cut.
and pinch or fall into chain.
KICKBACK SAFETY FEATURES
WARNING: The following features are included on your Pole
Saw to help reduce the hazard of kickback; however such features
will not totally eliminate this dangerous reaction. As a pole saw user
do not rely only on safety devices. You must follow all safety
precautions, instructions, and maintenance in this manual to help
avoid kickback and other forces which can result in serious injury.
Reduced-Kickback Guide Bar, designed with a small radius tip
which reduces the size of the kickback danger zone on bar tip. A
reduced- kickback guide bar is one which has been demonstrated
to significantly reduce the number and seriousness of kickbacks
when tested in accordance with safety requirements for electric
chain saws.
Low-Kickback Chain, designed with a contoured depth gauge
and guard link which deflect kickback force and allow wood to
gradually ride into the cutter. A low-kickback chain is a chain which
tested on the representative sample of chain saws.
Symbols
The label on your tool may include the following symbols. The symbols and
their definitions are as follows:
V ............... volts A ..........amperes
Hz ............. hertz W ......... watts
min ............ minutes
or AC ................. alternating
current
or DC direct current
n
o ........no load speed
............. Class I Construction ........earthing terminal
(grounded) .......safety alert symbol
.............. Class II Construction .../min or rpm...revolutions or
(double insulated) reciprocation per minute
........ ................Read instruction manual before use
.............. ................Use proper respiratory protection
............. ................Use proper eye protection
.............. ................Use proper hearing protection
POLE SAW NAMES AND TERMS
Drive Sprocket or Sprocket - The toothed part that drives the saw
chain.
Guide Bar - A solid railed structure that supports and guides the
saw chain.
Guide Bar Scabbard - Enclosure fitted over guide bar to prevent
tooth contact when saw is not in use.
Kickback - The backward or upward motion, or both of the guide
bar occurring when the saw chain near the nose of the top area of
the guide bar contacts any object such as a log or branch, or when
the wood closes in and pinches the saw chain in the cut.
Low-Kickback Chain - A chain that complies with the kickback
representative sample of chain saws.
Loading ...
Loading ...
Loading ...