Frigidaire GLER331AS1 Official Dryer

Owner's Guide - Page 6

For GLER331AS1.

PDF File Manual, 8 pages, Read Online | Download pdf file

GLER331AS1 photo
Loading ...
Loading ...
Loading ...
Care and Cleaning
Clean lint screen after every load,
Do not store or place laundry products
on top of dryer at any time, They can
damage the finish or controls,
Toreduce risk of fire or serious injury to persons or property, comply
with the basic warnings listed in zmzso_ Safety _tzuctiGss, pages 2-3, and
those listed below,
Before cleaning the dryer interior, unplug the elect:tics1 [sowercozd to avoid
electrical shock hazards.
Do not use any type spray cleanser when cleaning dryer interior. Hazardous
fumes or electrical shock could occur.
Inside
Clean the lint screen after every load. Lint build-up in the screen restricts air
flow, which causeslonger drying times, The screen islocated at the bottom of
the door opening. Remove by pulling straight up. Remove the lint and replace
the screen,
Occasionally a waxy build-up may form on the tint screen from using dryer-
added fabric softener sheets. To remove this build-up, wash the lint screen in
warm, soapy water, Dry thoroughly and replace. Do not operate the dryer
without the lint screen in place,
If the dryer drum becomes stained from noncolorfast fabrics, clean the drum
with a damp cloth and a mild liquid household cleanser. Remove cleanser
residue before drying the next load.
Every18 months an authorized servicer should clean the dryer cabinet interior
and exhaust duct. These areascan collect lint and dust over time. An excessive
amount of lint build-up could result in inefficient drying and possiblefire hazard.
Outside
Clean the cabinet with mild soap and water. Never use bzsh, _tty or
abrasivecleansers.
If the cabinet becomes stained, clean with diluted chlorine bleach [t/2 cup
(120 ml) in 1 quart (.95 liter) water], Rinse several times with clear water.
Removeglue residue from tape or labels with amixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label,
Before msvsm9 the dzqzer,place a strip of cardboard or thin fiberboard under
the front leveling legs to prevent damage to floor.
6
Loading ...
Loading ...