Loading ...
Loading ...
Loading ...
10
9
9. Have a second person hold the Handlebar
Post (6) near the Frame (1).
Locate the wire tie (D) in the Handlebar Post
(6). Tie the lower end of the wire tie to the Main
Wire (68).
Next, locate the middle of the wire tie (D) in the
access hole (E) in the Handlebar Carriage (16).
Pull the wire tie upward in the indicated location
(F) until the end of the Main Wire (68) is visible
in the access hole.
See the inset drawing. Next, pull the free end of
the wire tie (D) until the Main Wire (68) is routed
through the Handlebar Carriage (16) as shown.
Then, untie and discard the wire tie.
16
68
D
D
D
E
F
6
16
1
68
D
8
1
47
42
68
8. If there is a shipping support attached to the
Frame (1), remove and discard the shipping
support.
Orient a Post Bushing (42) as shown and hold
it near the Frame (1). Insert the Main Wire (68)
upward through the Post Bushing.
Next, locate the Post Knob (47) on the front of
the Frame (1). Loosen and pull the Post Knob,
and then insert the Post Bushing (42) into the
Frame. Make sure that the tabs (A) on the
Post Bushing are in the holes (B) in the
Frame.
Then, release the Post Knob (47) into the hole in
the Post Bushing (42).
A
B
Loading ...
Loading ...
Loading ...