Loading ...
Loading ...
Loading ...
-11-
ARTICULATION BUTTON
Your tool also features a 5 position
articulating head. To adjust, depress
articulation button and move head to
desired position (Fig. 4).
BRAKE
When the trigger switch is released it
activates the brake to stop the chuck
quickly. This is especially useful in the
repetitive driving and removal of screws.
AUTOLOCK™
Your tool is equipped with an automatic
locking system. This feature will lock the bit
holder in one position when the trigger
switch is released. This will allow you to
tighten or loosen a nut or screw by rotating
the tool by hand with the switch off. This is
convenient when higher turning torque is
needed.
BUILT IN WORK LIGHT
Your tool is also equipped with a light that
turns on automatically when the switch is
activated, for better visibility when
drilling/driving (Fig. 1).
BATTERY CHARGE CONDITION
INDICATOR LIGHTS
Your tool is equipped with charge
condition indicator lights (Fig. 1). The
indicator lights shows the charge
condition of the battery for a few second
when the On/Off trigger is pressed
halfway or fully.
INSERTING AND RELEASING
BATTERY PACK
Release battery pack from tool by
pressing on both sides of the battery
release tabs and pull downward (Fig. 5).
To insert battery, align battery and slide
battery pack into tool until it locks into
position. Do not force.
If battery release tabs
are cracked or
otherwise damaged, do not insert into
tool. Battery can fall out during operation.
LED Capacity
Continuous lighting 3 x green > 2/3
Continuous lighting 2 x green > 1/3
Continuous lighting 1 x green < 1/3
Flashing light 1 x green reserve
BATTERY
RELEASE
TABS
FIG. 5
FIG. 4
ARTICULATION
BUTTON
2610056734 02-21 PS11_BM 2610022006 04-12.qxp 2/15/21 10:39 AM Page 11
Loading ...
Loading ...
Loading ...