Kobe INX29 SQBF-500-2 INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

Loading ...

INSTALLATION

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

Calculation before installation

To calculate installation, please refer to TABLE 1. (All calculation in inches).

- FOR BUILT-IN / INSERT -

TABLE 1

A = Height of Floor to Ceiling

B = Height of Floor to Counter Top

(Standard: 36”)

C = Height of Counter Top to Wood Frame

Bottom (Recommended 26” to 30”)

D = Height of Wood Frame

SAFETY WARNING

• HOOD MAY HAVE SHARP EDGES, PLEASE WEAR PROTECTIVE GLOVES IF

REMOVING ANY PARTS FOR INSTALLING, CLEANING, OR SERVICING.

• BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE

HOOD MAY OCCUR. USING HAND TOLLS IS RECOMMENDED. DO NOT TIGHTEN

SCREWS.

• MAKE SURE TO PREVENT ANY DEBRIS FROM ENTERING THE VENT OPENING TO

AVOID DAMAGE OR MALFUCTION.

INSERT INSTALLATION

Before Installation

1. Read any provided document(s).

2. Test the range hood by temporarily connecting it to an outlet and turning ON the fan and

lights.

3. If you run into any problems, contact KOBE Range Hoods.

Venting Requirements

4. The range hood has top 6” round exhaust (default).

5. Decided the location of the venting pipe from the hood to the outside. A straight, short

vent run will allow the hood to perform more efficiently. Try to avoid elbows, transitions,

and long run as much as possible as this may reduce the performance of the hood. Make

sure that the duct work leads to the outside.

Loading ...

Kobe INX29 SQBF-500-2 Range Hood