Loading ...
Loading ...
Loading ...
EVID
TM
Owner’s Manual
5
Figure 8: Wattage Taps (4.2t & 6.2t)
Product Description
Step 2: Select Wattage Tap
(Models 4.2t and 6.2t Only)
Before mounting the speaker to the
bracket, select the proper wattage tap
setting for your installation. The wattage
selector switch is located at the rear of the
speaker below the input terminal panel.
The EVID™ 4.2t and 6.2t include a switch
for selecting the power taps. The EVID™
3.2t has a single power tap.
EVID™ 3.2t
A single (non-selectable) power tap rated
at 5W@70V and 10W@100V.
EVID™ 4.2t
The power taps are 30W, 15W and 7.5W
at both 70.7V and 100V, with a 3.7W tap
for 70.7V only, as well as an 8 ohm
transformer bypass setting.
EVID™ 6.2t:
The power taps are 60W, 30W and 15W
at both 70.7V and 100V, with a 7.5W tap
for 70.7V only, as well as an 8 ohm
transformer bypass setting.
The taps for the models listed above are
selected by a rotary switch on the back
panel. A guide on the back of each
speaker shows which switch positions to
use for the power settings at 70V and
100V.
Figure 8 below illustrates the settings for
the 4.2t and 6.2t.
Step 3: Mount the Speaker to the
SAM™ Bracket
Attach the speaker to the SAM™ bracket
with the socket head bolt B, as shown in
Figure 9.
Figure 10: Recommended Torque
Settings for Bolt A
Using the provided security tool, tighten
the two socket head bolts shown in Fig.
9. Select the proper horizontal angle and
secure it by tightening Bolt A to the proper
torque listed in Fig. 10. Then select the
proper vertical angle and secure it by
tightening Bolt B. Use the 15° angle
markers as your guide (see Fig. 9). Attach
both logo caps as shown in Figure 11
after tightening and securing the speaker.
4.2t
6.2t
Figure 11: Attach Logo Caps
E
V logo cap
(
large)
EV logo ca
p
(sma
ll)
Figure 9: Tighten Socket Head Bolts
Bolt
A
(swin
g)
Bolt
B
(rotatio
n)
15˚ angle marke
rs
Model Torque
EVID 3.2 20-30 in-lbs (2.3-3.4 N-m)
EVID 4.2 30-50 in-lbs (3.4-5.2 N-m)
EVID 6.2 70-90 in-lbs (7.9-10.2 N-m)
Loading ...
Loading ...
Loading ...