Loading ...
Loading ...
Loading ...
Burner ,Firebox and Control Knob
[] Place burner assembly into firebox. Fasten the burner assembly to the firebox using (2) 5x15 fiber washers and
(2) #10-24x1/2" machine screws. Insert (4) #10-24x1-1/4" machine screws (heat diffuser support screws) from
outside the firebox, then fasten with (4) 5x15 fiber washers and (4) #10-24 flange nuts from the inside (A).
[] Place firebox on cart. Make sure burner tubes are correctly engaged with valves. If burner is not level from left
to right, adjust the two screws attaching valve to control panel. Attach ignitor wire to ignitor (B).
[] Attach firebox with (4) #10-24x2" machine screws, (4) 5x15 fiber washers and (4) #10-24 flange nuts (C).
[] Pushcontrol knobs onto valve stems (C).
A Burner assembly
Firebox
$
7
#10-24 Flange Nut
#10-24X1-1/4" Qty. 8
Machine Screw
/
/
5x15 Fiber Washer
Qty. 10
#10-24x1-1/4"
Machine Screw
Qty. 4
#10-24x2"
Machine Screw
..........5x15 Fiber
Washer
#10-24X1/2"
Machine Screw
C
Heat shield
for Tank
Ignitor w_re
5x15 ............i
Fiber Washer
Make sure the Venturi tubes are located
underneath Heat Shield
#10-24
Flange Nut .....
t ,
Control
Knob
20 " 464622013
#10-24x2" #10-24xl/2"
Machine Screw Machine Screw
Qty. 4 Qty. 2
Loading ...
Loading ...
Loading ...