Loading ...
Loading ...
Loading ...
14 WWW.SENIXTOOLS.COM
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE RECOMMENDED ACTIONS
Unit will not blow
or mulch
1. Bag full 1. Empty the bag.
2. Blocked tube 2. Clear the blockage.
3. Blocked impeller 3. Clear the blockage.
4. Dirty bag 4. Clean the bag.
5. Torn bag 5. Replace the bag.
6. Bag unzipped 6. Zip up the bag.
7. Unit unplugged 7. Plug into an outlet or an extension cord.
Unit will not start
1. Unit is unplugged
1. Check cord to make sure it is plugged into an
electrical outlet.
2. Power/speed switch is in the
OFF (0) position.
2. Slide the power switch to the ON (1) position
3. Defective power switch. 3. Contact Senix customer service at 1-800-261-3981.
4. Vac tubes are not correctly
installed.
4. Check vac tubes and ensure that they are correctly
installed to allow the switch to be engaged.
5. Intake gate/cover is not closed. 5. Ensure that gate/cover is fully closed and locked.
6. House circuit may have tripped.
6. Check wall circuit breaker panel and reset if
necessary.
As the equipment owner, you are responsible for the performance of the required maintenance listed in the
Maintenance section. It is recommended that you retain all receipts covering maintenance on your equipment.
degrade performance, cause irreversible engine damage and/or void your warranty.
Always unplug the power cord before performing any adjustments, maintenance or repairs to your electric blower
vac.
Loading ...
Loading ...
Loading ...