Loading ...
Loading ...
Loading ...
en Programme overview
16
--------
Tub clean/Tub Clean
Program for cleaning and caring for the drum and the impeller, e.g. before run-
ning the first wash cycle or if an odour has developed after an extended period of
non-use.
Notes
■ We recommend running this program once a month.
■ Run the Tub clean/Tub Clean program without any laundry.
■ Use standard washing powder or a detergent that contains a bleaching
agent. To prevent foaming, only use half the amount of detergent recom-
mended by the detergent manufacturer. Do not use detergents intended for
woollens or delicates.
Empty
Auto Start/One Touch Start
The washing program and water level are set automatically depending on the
load.
Note: The washing program starts immediately and the program duration is
shown on the display. Ensure the following beforehand:
■ The laundry is placed into the drum.
■ The detergent has been added.
Setting Auto Start/One Touch Start:
1. Press # to switch on the appliance.
2. Press A.
Note: If laundry is heavily soiled, chose a program suitable for the type of fabric.
-
Rinse
Laundry is rinsed and then spun, and the rinsing water is pumped away.
Setting the Rinse program:
1. Press # to switch on the appliance.
2. Press O Rinse.
3. Press A.
-
Spin
Laundry is spun only, and the rinsing water is then pumped away.
Setting the Spin program:
1. Press # to switch on the appliance.
2. Press 0 Spin.
3. Press A.
-
Loading ...
Loading ...
Loading ...