Loading ...
Loading ...
Loading ...
66
Procedure
Step 1 Select
Setting
>
Smart Thermal
>
Call Detection
>
Global Setup
.
Step 2 Add detected area and excluded area.
1) Click
Add Detect Region
to draw a detected area on the image. Right-click to end
drawing.
Click
Add Detect Region
again to re-draw.
2) Click
Add Exclude Region
to draw an excluded area on the monitoring image. Right-
click to end drawing.
●
Click
Delete Exclude Region
to delete the excluded area.
●
An excluded area takes effect only when it has been drawn in the detected area.
●
Multiple excluded areas can be drawn in the detected area.
Step 3 Click
Save
.
5.5 Smoking Detection
Configure global rules for smoking detection. You can draw the detection area and exclusion areas.
When the configured rules are triggered in the detection areas (out of the exclusion areas), an alarm
will be triggered.
This function is only available on the thermal channel.
5.5.1 Configuration Flow
Figure 5-36 Configuration Flow
5.5.2 Configure Smart Plan
You need to enable smart plan before intelligent rules function.
Step 1 Select
Setting
>
Event
>
Smart Plan
.
Loading ...
Loading ...
Loading ...