Loading ...
Loading ...
Loading ...
65
Figure 5-35 Rule configuration
Step 3 (Optional) Select
Max Size
or
Min Size
, click
Draw Target
, and then drag the corners of
the filter box to make the box larger or smaller.
Click
Clear
to delete all drawn detection lines.
Step 4 Select
Enable
, and then set the interval and sensitivity.
●
Interval: The time that calling behavior lasts. When the Camera detects the calling time
beyond the configured value, an alarm is triggered.
●
Sensitivity: The larger the value is, the more sensitive the call detection is. However,
setting the value too large might cause false alarm.
Step 5 Configure arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage"
and "5.1.2 Setting Period".
Step 6 Click
Save
.
Result
According to the configured rules, when call action is detected in the detection area, an alarm is
triggered, and the Camera performs linkage actions.
Click the
Alarm
tab on the main page, and then select
IVS
. When an alarm is trigged, you can view
the details on the
Alarm
page.
5.4.4 Configuring Global Setup
Configure global rules for call detection. You can draw the detection area and exclusion areas. When
the configured rules are triggered in the detection areas (out of the exclusion areas), an alarm will be
triggered.
Loading ...
Loading ...
Loading ...