Loading ...
Loading ...
Loading ...
24
15. Rainfall (1h) high alarm
16. Rainfall (24h) high alarm
17. Absolute pressure high alarm(ABS)
18. Absolute pressure low alarm(ABS)
19. Absolute pressure high alarm(REL)
20. Absolute pressure low alarm(REL)
21. Indoor temperature high alarm
22. Indoor temperature low alarm
23. Indoor humidity high alarm
24. Indoor humidity low alarm
Note: To prevent repetitive alarming of humidity, there is a 4%
tolerance band. For example, if you set the high alarm to 60% and
silence the alarm, the alarm icon will continue to flash until the humidity
falls below 56%, at which point, the alarm will reset and must increase
above 60% to activate again.
8.4. Alarm and Command Key Beeper ON/OFF Mode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the ALARM key for three seconds to
toggle the beeper on or off (depending on the current setting).
The BZ ON (beeper on) or BZ OFF (beeper off) icon will appear in the
time area for three seconds. Press and hold the ALARM key again for
three seconds to toggle the BZ ON or BZ OFF command.
9. WiFi Connection Status
When the console successfully connects to your Wi-Fi router, the Wi-Fi
signal icon will appear on the LCD display(In front of the Indoor
Temperature). If the Wi-Fi signal is not stable or the console is trying to
connect to the router, the icon will flash. If the icon disappears, it means
the console is not connected to the Wi-Fi router.
Note: If you own a dual band router (2.4 GHz and 5.0 GHz),
make sure you connect to the 2.4 GHz band, otherwise it will fail to
connect the weather station to WiFi.
10. Time Server Sync Status
Loading ...
Loading ...
Loading ...