Loading ...
Loading ...
Loading ...
20
11. Rainfall Units of Measure (default: in). Touch the SET key again
to change the Rainfall units of measure. Touch [+] key or [-] key to
toggle the rainfall units between mm and in.
12. Barometric Pressure Display Units(default: inHg). Press the
SETkey again to change the pressure units of measure. Press the
[+] key or [-] key to toggle the pressure units between mmHg, inHg
or hPa.
13. Pressure Threshold Setting (default level 2). Press the SET key
again adjust the Pressure threshold setting. Press [+] key or [-] key
to adjust the pressure threshold setting up or down.
14. Weather Forecast Icon Setting (default: partly cloudy). Press
the SET key again to set the weather forecast icon initial conditions
(based on the current weather conditions). Press the [+] key or [-]
key to toggle weather icons between sunny, partly cloudy, cloudy,
or rainy.
15. Time SYNC(default:ON).Press the SET key again to set the
network time sync. Press the [+] key or [-] key to switch between
SYNCtime ON and SYNCtime OFF of measure.
16. Location division.(default: Northern Hemisphere) Press the SET
key again to change the location division. Press the [+] key or [-]
key to toggle the sunlight units Northern Hemisphere (NOR)or
Southern Hemisphere(SOU).(refer to 5.0 Final Installation of
Integrated outdoor transmitter)
7.3. Sensor Search Mode
If Outdoor sensor loses communication, dashes (--.-) will be displayed.
To reacquire the lost signal, press and hold the CH/+ button for 3
seconds to enter the sensor search mode.
7.4. Reset Min/Max record
Note: The minimum and maximum value of all channels will be
cleared in the reset mode.
In normal mode, Press (do not hold) the MIN/MAX/-key, and the MAX
icon will be displayed. Press the SET key to view rainfall (1h, 24h, week
or month) , pressure (ABS or REL) max value ,outdoor temperature
(temperature, dew point or feels like).
Loading ...
Loading ...
Loading ...