Mr. Coffee BVMC-LM200BLK 4-in-1 Single-serve Latte, Iced, And Hot Coffee Maker

User Manual - Page 9

For BVMC-LM200BLK.

PDF File Manual, 16 pages, Read Online | Download pdf file

BVMC-LM200BLK photo
Loading ...
Loading ...
Loading ...
9
CLEAN COFFEEMAKER BEFORE FIRST USE
1. Plug the coffeemaker in.
2. Fill your favorite mug with clean, ltered water to brew a concentrated coffee shot.
3. Lift the lid of the unit and pour the water in to the water reservoir to the 4-ounce
mark. Discard any excess water in your mug.
4. Place the reusable coffee lter (or standard 5-cup basket-style paper lter) into the
brew basket.
5. Using the HOT side of the coffee scoop, add 1½ scoops of coffee grounds to the
coffee lter. Move the shower head over the coffee lter and grinds. Close the lid.
NOTE: If you want a stronger coffee shot, add an additional ½ scoop of coffee
grounds.
6. Place the mug under the brew head. Press the Hot Brew button – ensure the LED
is illuminated.
7. While your coffee is brewing, prepare your frothed milk.
NOTE: Before adding milk, ensure that your whisk is properly placed at the bottom
of frother jar by clicking in-place and securely fastening it.
NOTE: Please ensure to handle frothing jar by the silicone sleeve as the bottom of the
frothing jar gets hot!
NOTE: Clean frothing jar after each use.
NOTE: Wait a minute or so before frothing again to allow the heater to cool.
NOTE: Do not touch frothing warming plate after use as it is hot.
For a Hot Latte:
8. Add 6.5 ounces of the milk of your
choice to the latte line indicator in
the frothing jar.
9. Place frothing jar on mount. Put lid
back on the frothing jar.
10. Press the Hot Froth or Hot Latte
button (depending on your model).
Ensure the LED is illuminated and
frothing will begin. Frothing jar will
stop automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother
by pressing Hot Froth or Hot Latte
button again. Cycle will need to be
re-started if desired.
11. Add frothed milk into mug
and enjoy!
For a Hot Cappuccino:
8. Add 5 ounces of the milk of your
choice to the capp line indicator in
the frothing jar.
9. Place frothing jar on mount. Put lid
back on the frothing jar.
10. Press the Hot Froth or Hot Capp
button (depending on your model).
Ensure the LED is illuminated and
frothing will begin. Frothing jar will
stop automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother
by pressing Hot Froth or Hot Capp
button again. Cycle will need to be
re-started if desired.
11. Add frothed milk into mug
and enjoy!
LET’S MAKE A HOT LATTE OR CAPPUCCINO!
Loading ...
Loading ...
Loading ...