Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE AND REMEDY
WATER WON'T • Make sure drain hose is not kinked.
DRAIN • Top of drain outlet should be less than 8 ft. above floor.
WATER LEAKS * Make sure hose connections are tight at faucets.
• Make sure end of drain hose is correctly inserted in and secured to drain facility.
WASHER IS NOISY • Make sure washer is level and firm to the floor with rubber foot pads in place and
front jam nuts tight. See your Installation Instructions.
• A sharp distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission "locks in7 This sound is normal.
•Heavily unbalanced loads can cause the washer to vibrate excessively during spin,
and may cause it to move from its original position. In extreme cases, (usually occurs
when washing a single, heavy item or a small load when water level is set higher than
necessary) the spin basket may strike the outer tub, creating a loud but harmless noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart.
WASHER PAUSES * Washer normally pauses between washing steps.., such as between wash and spin or
IN CYCLE between spin and rinse.
If you need more help.., call, toll free:
GE Answer Center _9
800.626.2000
consumer information service
25
Loading ...
Loading ...
Loading ...