Loading ...
Loading ...
Loading ...
EW-D EM rack receiver
50
Installing receivers in a rack
Observe the following instructions when mounting the receiv-
er in a rack.
The mounting brackets for installing the receiver in the rack
can be found in the packaging under the tray:
CAUTION!
Rack mounting poses risks
When installing the device in a closed 19" rack or multi-rack
assembly, please consider that, during operation, the ambient
temperature, the mechanical load and the electrical potentials
will be different from those of devices which are not mounted
into a rack.
▷Make sure that the ambient temperature within the rack
does not exceed the permissible temperature limit stated
in the specifications. See "SPECIFICATIONS".
▷Ensure sufficient ventilation; if necessary, provide addi-
tional ventilation.
▷Make sure that the mechanical load of the rack is even.
▷When connecting to the power supply system, observe the
information indicated on the type plate. Avoid overloading
the circuits. If necessary, provide overcurrent protection.
▷When mounting in a rack, please note that intrinsically
harmless leakage currents of the individual power supply
units may accumulate, thereby exceeding the permissible
limit value. As a remedy, ground the rack via an additional
ground connection.
Rack mount angles
Power supply unit
Power supply adapters
Loading ...
Loading ...
Loading ...