Loading ...
Loading ...
Loading ...
EW-DX EM 2 rack receiver
147
System -> Auto Setup menu item
In this menu item, you can activate the Auto Setup function
for the receiver.
If the function is activated here, you can perform an automatic
frequency setup for both channels of this receiver via the Scan
/ Auto Setup menu item.
See "Ch 1 / Ch 2 -> Scan / Auto Setup menu item".
The receiver will also be enabled for automatic frequency set-
up in a network consisting of multiple receivers.
If the function is disabled here, you can only assign a frequen-
cy to the selected channel of the receiver via the Scan / Auto
Setup menu item.
To open the Auto Setup menu item:
▷In the System menu, navigate to the Auto Setup menu
item.
▷Press the jog dial to open the menu.
The following view is displayed:
▷Turn the jog dial to choose between the On and Off op-
tions.
▷Press the jog dial to save your setting.
Loading ...
Loading ...
Loading ...