Loading ...
Loading ...
Loading ...
6 Cyclone Insert Installation - English
MOUNTING HEIGHTS AND CLEARANCE
• e hood should be installed at 28” minimum above the
cooking surface. If pairing your range hood with a gas
stove minimum mounting height must be 30” above the
cooking surface.
WARNING
Minimum mount height between range top to hood bottom should
be no less than 28” for electric or ceramic stoves, and no less than 30”
for gas stoves. e maximum mount height should be no more than
36”. e hood must be installed at the correct mounting height. Hoods
mounted too low could result in heat damage. Hoods mounted too
high, on the other hand, will be less eective and performance may
suer.
Check your ceiling height and the hood height maximum before
you select your hood.
Hood installation height above cook top is the user’s preference.
e lower the hood is above the cook top the more ecient it will
be in drawing out cooking odors, grease and smoke.
WIRING INSTALLATION
Min:
Ceramic/Electric
28”
Gas 30”
Max:
36”
36”
Install the Electrical Power Supply
Install a junction box inside the upper corner of the cabinet. For
the model SS13024, it should be installed at a minimum of 8” away
from the center of the cabinet and 12” above the bottom of the
cabinet. For the models SS13030, BX21228/BX21528, BX600/
CLX60, it should be installed at a minimum of 11” away from the
center of the cabinet, and 12” above the bottom of the cabinet. For
the model BX21234/BX21534, it should be installed at a minimum
of 13” away from the center of the cabinet, and 12” above the
bottom of the cabinet.
is appliance requires 120V 60Hz electrical supply and connection to an individual properly grounded branch circuit protected
by a circuit breaker or time delay fuse.
Preparation for Vent and Exhaust Duct Connection
1. To connect a rectangular vent to a round exhaust duct (or vice
versa), use a connecting duct and adapter.
2. e round vent of a Cyclone Range Hood is 6” diameter. If
the round exhaust duct is not 6” diameter, a connecting duct
is necessary to accommodate the dierent size. If the exhaust
duct is less than 6” diameter, the eciency of your Cyclone
Range Hood will be reduced and the warranty may be voided.
3. An exhaust duct needs to be cut if there is not an existing duct
in your home. Please consult/hire a professional to complete
the work properly. For top venting, a rectangular or a 6”
round hole needs to be cut through the ceiling or the back
wall and the bottom of the cabinet to t the duct connection.
Ceramic/Electric
28”
Max:
36”
Gas
30”
Min:
Loading ...
Loading ...
Loading ...