Loading ...
Product voltage :120V Rated power:1300 watts and 1000watts
1. Power on: power on the motherboard self-check drop a sound, digital
display dot.
2.On key: Press on key to enter standby, digital display “---”
3. Function key: In standby mode, press Select to enter the heating mode.
Display as "P9", repeatedly touch the function key to adjust to:
timing/temperature gear. (W-power heating mode, MIN-timing,
℃- temperature heating mode).
4. Add and subtract keys: adjust gear/temperature/time parameters.
5. Child lock: Hold down the add and subtract keys for 2-3 seconds to lock
or unlock (LOC will be displayed after the lock is successful). The add,
subtract, and select keys of the locked state cannot be manipulated.
1) Power display: P1-P2-P3-P4-P5-P6-P7-P8- nine sections can be P9
adjusted.
2) Temperature display: 80-100-120-140-160-180-200-220- nine 240
sections can be adjusted.
3) Time: -T- -----120 minutes adjustable. Up by 5 minutes, down by 1 0
minute. Long press progressive.
Note: The red fields are the default values for startup heating.
Furnace surface high temperature: display “H.Ot”
6. Code:
E0------- no pot
E1------- The voltage is lower than 60.
E2------- Excessive voltage (voltage higher than 138)
E3------- Furnace surface overtemperature or sensor damage short circuit
E4------- Furnace surface sensor open
E5-------IGBT overtemperature or fan damage does not work
E6------- The IGBT sensor is open
E8------- The control board is connected to the main power supply board
TROUBLE CODE AND TROUBLESHOOTING
Glass plate
control panel
The above is only the schematic diagram of the structure,
please refer to the actual object.
Loading ...
Loading ...