LS143 Instructions

Loading ...

General Controller LS143

WIRING PLAN - DC Motor WIRING PLAN - Three-way Switch

Facebook: ilifesmarthome

Twitter: ilifesmarthome

The on/oﬀ status of CH1, CH2 and CH3 depends

on the connection of K1/K2/K3.

Connected to the power resource parallel.

CH1 and CH2 is connected to each interface of the DC

motor separately.

COM+ is normally open, and connected to the

public interface of the motor, and is disconnect-

ed with CH1, CH2 and CH3 in default. If the control

item is on then it is connected. It can be powered

by GND.

COM- is normally closed and connected with

CH1 and CH2 in default. If the control item is on

then it is disconnected.. It can be powered by

DC+.

CND

DC+

CH1

CH2

CH3

COM+

COM-

Universal Control Board

Power Resource Interface

Conﬁguration Button

The on/oﬀ status of CH1, CH2 and CH3 depends

on the connection of K1/K2/K3.

1. Connected to the power resource parallel.

2. Power the sensor using GND/0V and 12V/24V.

3. If the sensor has a power resource itself, the

sensor also can power the Universal Control Board

using the DC input.

It can connect to three diﬀerent output interfaces here.

The control channels with CH1, CH2 and CH3 can work

independently.

COM+ is normally open, and disconnected with

CH1, CH2 and CH3 in default. If the control item

is on then it is connected.

COM- is normally closed, and connected with

CH1,CH2 and CH3 in default. If the control item

is on then it is disconnected.

CND

DC+

CH1

CH2

CH3