Dahua TPC-SD5441 Thermal Network Hybrid Pan & Tilt Camera Web3.0 Operation Manual V2.0.1

Loading ...

Step 7 Configure alarm linkage action. For details, see "5.1.1 Alarm Linkage".

Step 8 Click

Save

5.7.7.2 Configuring Smoke and Heat Detection Mode

Step 1 Select

Setting

Smart Thermal

Heat

Smoke and Heat Detection Mode

Step 2 Select the smoke and heat detection mode. We recommend you select

Heat or Smoke

Figure 5-60 Smoke and heat detection mode

Table 5-14 Parameters of smoke and heat detection mode

Parameter Description

Heat or Smoke

When the visible channel detects smoke or the thermal channel

detects heat point, an alarm will be triggered.

Heat Only

When the thermal channel detects heat point, an alarm will be

triggered.

Smoke Only When the visible channel detects smoke, an alarm will be triggered.

Heat and Smoke

When the visible channel detects smoke and the thermal channel

detects heat point at the same time, an alarm will be triggered.

Step 3 Click

Save

5.7.7.3 Verification

After configuration, enable

Heat

Prompt

, and

Play Alarm Tone

. When an alarm is triggered, the

Camera prompts and records alarm according to the actual situation.

Step 1 Click the

Alarm

tab.

Step 2 Select

Heat

Loading ...

Dahua TPC-SD5441 Thermal Hybrid Speed Dome Camera