Loading ...
Loading ...
Loading ...
Hold and backlight function button. When taking a measurement, press this button to hold the
data for easier recording. Press the button again to remove the hold function.
Press and hold this button to turn on the backlight on the LCD screen.
Max/Min Button
When taking a measurement, press this button once to enter “Max Mode”. In this mode, the
multimeter will capture the highest reading it records. Press this button again to enter “Min
Mode” which will capture the lowest reading it records.
Press and hold this button to exit the Max/Min Modes.
Range Button
AC/DC Voltage, AC Current, and Resistance can all be measured in both Auto and Manual
ranging. The multimeter will come set to Auto, but if you desire to select the range manually,
press the Range Button repeatedly to find the desired range. Beware of selecting a range too
low, as it will Overload the device and the multimeter will not give a reading.
Press and hold the Range Button to return back to Auto Ranging.
Relative Button
When taking measurements, you can utilize the Relative Button to get more accurate readings
by removing the resistance of the test leads, for example. To activate this function, simply press
the Relative Button. A small triangle (delta symbol) will appear on the display and the reading
should change to zero.
Press the Relative Button again to exit relative mode.
Hz/Duty Button
When using the Hz/Duty Cycle function on the multimeter, quickly switch between functions by
pressing this button. You can also switch to measuring Hz while measuring other functions, like
Voltage, for example, by pressing this button during measurement.
Clamp Meter Attachment (Not Included)
Use a clamp meter attachment to measure currents, use the COM terminal for the black lead
from the clamp meter and the Input terminal for the red lead from the clamp meter.
Multi-Function Socket (Included)
Use the multi-function socket to measure both Capacitors and Transistors. Be sure to correctly
insert the multi-function socket into the COM and INPUT plugs with negative the negative
terminal on the multi-function socket on the left side and the positive on the right side.
DETAILED SPECIFICATIONS
Accuracy is guarantied for 1 year 23°C±5°C less than 80%RH
Loading ...
Loading ...
Loading ...