Loading ...
Loading ...
Loading ...
22
Adjusting the color to the desired quality
Use this procedure to adjust the white balance for bright pic-
tures and dark pictures to achieve the desired color quality.
Example: Adjusting the "WHITE BALANCE"
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “PICTURE”, then
press the “OK” button.
The “PICTURE” screen appears.
2. Use the ▲ and ▼ buttons to select “COLOR TEMP”.
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP.
NR
RETURN
EXIT
MEMORY
2
NR-1
:
:
:
OK
RG
3. Use the 䊴 and 䊳 buttons to select "PRO".
The mode switches as follows when the 䊴 and 䊳
buttons are pressed:
→ 1 ↔ 2 ↔ 3 ↔ PRO ←
If neither the 䊴 or 䊳 button is pressed within 5 seconds,
the current selection is set and the previous screen reppears.
4. Press the “OK” button.
The "WHITE BALANCE" screen appears.
5. Use the 䊴 and 䊳 buttons to select "R-GAIN".
WHITE BALANCE
GAIN
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
RETURN
EXIT
OK
R-GAIN
6. Adjusts the white balance using the 䊴 and 䊳 buttons.
WHITE BALANCE
GAIN
RED
GREEN
BLUE
BIAS
RED
GREEN
BLUE
RETURN
EXIT
OK
Information
䡵 Adjusting the white balance
RGB-GAIN ....White balance adjustment for signal
level
RGB-BIAS.....White balance adjustment for black
level
䡵 Restoring the factory default settings
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.
COLOR TEMP.
PRO
:
* If neither the 䊴 or 䊳 button is pressed within 5 sec-
onds, the current setting is set and the previous screen
reappears.
7. Press the “OK” button.
The white balance has now been adjusted.
8. Once the adjustment is completed...
Press the “MENU” button.
All menus disappear.
Loading ...
Loading ...
Loading ...