Loading ...
Loading ...
Loading ...
6
RISK OF DAMAGE!
The packaging must be undamaged. Check the device for transport damage. Do not
connect a damaged device under any circumstances. In case of damage, please contact
the supplier.
Removing the Transport Cover
The unit and parts of the interior are protected for transport. You can remove all
adhesive tapes on the right and left side of the device door as well as
any adhesive residues with cleaning solvent. Remove all adhesive tapes and packaging
parts from the interior of the device as well.
After transport, the device should stand for 12 hours to allow the coolant to collect in
the compressor. Non-observance could damage the compressor and thus lead to the
failure of the device.
Setting up the device
• The ambient temperature affects the power consumption and proper functioning of
the device. Therefore, the device should be placed in a well-ventilated and dry room
with an ambient temperature corresponding to the climate class for which the device
is designed.
• Do not place the device outdoors (e.g., balcony, terrace, garden shed, etc.).
Do not use sharp knives or pointed objects when opening the device. Please
observe the notes when setting up: “Tips for energy saving “
Removing the unit’s doors
• If the unit does not fit through the apartment door, the unit’s door can be unscrewed
to allow for easier transportation.
ATTENTION
The unscrewing of the unit doors may only be carried out by customer service.
Before The First Use
Loading ...
Loading ...
Loading ...