Loading ...
Loading ...
Loading ...
22
Defrosting
Cleaning of door tray
Cleaning of glass shelf
Cleaning the vegetable drawer
CLEANING AND MAINTENANCE
•
The refrigerator is made based on the air-cooling principle and thus has an automatic
defrosting function. Frost is formed due to a change in season or temperature, it can be
manually removed by disconnecting the appliance from the power supply or by wiping it
with a dry towel.
•
According to the direction arrow in the figure
to the right, use both hands to squeeze the
tray, and push it upward, then you can take it
out.
•
After removing the tray and cleaning it, you
can adjust its height during installation in
accordance with your requirement.
•
At the innermost part of the refrigerator liner where
the shelves have a backstop, you can raise the
shelve upward, then pull them towards you to
remove them.
•
Adjust or clean the shelves according to your
requirement.
1.
Remove the contents of the drawer. Hold the
handle of the vegetable drawer and pull it out
completely until it stops.
2.
Lift the vegetable drawer up and remove it by
pulling it out.
NOTE:
Soft towels or sponges dipped in water and non-corrosive neutral detergents are suggested for cleaning. The
freezer should be cleaned with clean water and dry cloth. Open the door for natural drying before the power is
turned on. Do not use hard brushes, clean steel balls, wire brushes, abrasives such as toothpaste, organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid, or alkaline items because they may
damage the refrigerator surface, and interior.
Loading ...
Loading ...
Loading ...