Breville Edge
Still Hot stainless steel kettle
VKT192_20EM1 (UK).indd 1VKT192_20EM1 (UK).indd 1 7/30/20 09:007/30/20 09:00
2 3
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Filter behind the spout
2. Spout
3. Pull off lid
4. Water level window
5. On/off switch
6. 360 rotational power base with cord storage
7. Easy clean, fast boil concealed element
PRODUCT SAFETY
READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
unless they are older than
8 and supervised. Keep the
appliance and its cord out of
the reach of children aged
less than 8 years.
Never use a power base other
than the one supplied with the
appliance.
Never ll the kettle above the
MAX marking. If the kettle is
overlled, boiling water may
be ejected.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualied
persons in order to avoid a
hazard.
! This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
! This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, res
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
! Never use this appliance for anything
other than its intended use. This
appliance is for household use only. Do
not use this appliance outdoors.
! Always ensure that hands are dry before
handling the plug or switching on the
appliance.
! Always use the appliance on a stable,
secure, dry and level surface.
! This appliance must not be placed on or
near any potentially hot surfaces (such
as a gas or electric hob).
! Do not use the appliance if it has been
dropped, if there are any visible signs of
damage or if it is leaking.
! Ensure the appliance is switched off and
unplugged from the supply socket after
use and before cleaning.
! Always allow the appliance to cool
before cleaning or storing.
! Never immerse any part of the
appliance or power cord and plug in
water or any other liquid.
! Never let the power cord hang over the
edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
! Never leave the appliance unattended
when in use.
! Beware of steam coming from the spout
or lid especially during relling. Never
open the lid during the boiling cycle.
! Never ll the appliance when it is
positioned on the power base.
! Never use the kettle without sufcient
water in the kettle for it to operate
correctly.
! Never allow the appliance to boil dry.
1
7
2
6
3
4
5
VKT192_20EM1 (UK).indd 2-3VKT192_20EM1 (UK).indd 2-3 7/30/20 09:007/30/20 09:00
4 5
BEFORE FIRST USE
Remove any packaging and promotional material
from your kettle and position it on a stable, secure,
dry and level work surface away from the edge.
Before connecting to a power source, make sure
your mains supply voltage is the same as the one
indicated on the appliance. Connect the plug to a
suitable power outlet and make sure that the power
cord does not overhang the work surface. Excess
power cord can be stored in the power base.
Remove the kettle from the power base and open
the lid. Fill your kettle to the maximum mark and
close the lid.
Place your kettle back onto the power base. Switch
your kettle on, allow it to boil then discard the water.
Repeat twice. This will remove any residue left over
from the manufacturing process.
USING YOUR KETTLE
If this kettle is lled above the maximum level
mark, hot water may be ejected from the spout
during boiling. Beware of steam coming from
the spout or lid especially during relling. Never
open the lid when the kettle is boiling.
1. With your kettle switched off, plug the power
base into a suitable power outlet.
2. Remove your kettle from the power base before
lling it with water.
3. Fill your kettle with water. You can ll it through
the spout or by opening the lid. Don’t overll
your kettle and always ensure that there is
sufcient water in your kettle for it to operate
correctly. This is approximately 250ml or 1
teacup full. Always check the water level when
your kettle is positioned on its power base.
4. If opened previously, close the lid and then
switch your kettle on. Make sure that the lid is
correctly closed to ensure safe operation. As the
water heats up the water level illumination will
change from white to red.
5. When the water reaches boiling point, your
kettle will switch off automatically and the water
level window illumination will switch to the ‘still
hot‘ illumination.
6. You may also switch your kettle off manually at
any time by moving the switch to the off position.
Always use caution when lifting or carrying
your kettle when it is full of boiling water and
when pouring it.
ENERGY SAVING HINTS AND TIPS
A Breville
®
kettle, if used correctly, is a very energy
efcient device. Why not try some of these energy
saving tips:
• Only boil the water you need. Overlling your
kettle by one cup is the equivalent to using an
energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle.
For example, one litre of water will still be at
90°C after ve minutes - the perfect temperature
for a cup of coffee.
IF THE KETTLE BOILS DRY
If the kettle is operated with insufcient water a built
in fail-safe device will automatically switch it off.
• Unplug your kettle and allow it to cool. When it
has cooled down sufciently the safety device
will reset itself.
• Once the safety device has reset, rell your
kettle with cold water and use it as normal.
LIGHTING SEQUENCE
The lights used to illuminate your kettle are light
emitting diodes (LEDs). The amount of energy used
by LEDs is very small—a fraction of the energy used
by a normal light bulb.
STILL HOT ILLUMINATION
After boiling, the illumination of your kettle will
remain red indicating that the water is still hot
enough to make a hot beverage such as tea or
instant coffee. The ‘still hot’ illumination is active
when the water temperature is above 80ºC. When
the temperature of the water falls below 80ºC, the
illumination will switch off.
Kettle Illumination
Kettle on/off switch OFF, before boiling. No illumination unless the temperature of the water
is above 80ºC
Kettle on/off switch ON The illumination changes from white to red
(assuming that the water is cool) to indicate the
progress of the boiling cycle. The redder the
illumination, the closer the water is to boiling.
Kettle on/off switch is switched to ON to boil or
reheat water that is already hot.
If you switch your kettle on when the water inside is
already partially heated, the illumination colour will
be appropriate to the temperature of the water. The
illumination will continue getting redder as your kettle
reheats the water to boiling point.
Kettle on/off switch OFF, after boiling. The illumination will remain red until the temperature
of the water has fallen below 80ºC. This saves you
from reboiling hot water.
VKT192_20EM1 (UK).indd 4-5VKT192_20EM1 (UK).indd 4-5 7/30/20 09:007/30/20 09:00
6 7
AFTER SALES SERVICE & REPLACEMENT
PARTS
In the case the appliance does not operate but is
under warranty, return the product to the place it was
purchased for a replacement. Please be aware that
a valid form of proof of purchase will be required.
For additional support, please contact our Consumer
Service Department at 0800 028 7154 or email:
TROUBLESHOOTING
For troubleshooting and FAQs visit:
www.breville.co.uk/faqs
ELECTRICAL SAFETY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type.
If the fuse in a moulded plug needs to be changed,
the fuse cover must be retted. The appliance must
not be used without the fuse cover tted.
If the plug fuse requires replacement, a fuse of the
same rating as that tted by the manufacturer must
be used. In order to prevent a hazard do not t a
fuse of a lower or higher rating.
If the terminals in the plug are not marked or if you
are unsure about the installation of the plug please
contact a qualied electrician.
Blue
(Neutral)
Brown
(Live)
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
Waste Disposal
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. E-mail us at [email protected] for
further recycling and WEEE information.
CLEANING
Always unplug the kettle from the mains
supply socket and allow it to completely cool
down before cleaning or descaling it. Do not
immerse the kettle, power base or power cord
and plug in water or any other liquid.
1. Clean the exterior surface of the kettle with a
damp cloth and then polish with a soft dry cloth.
Do not use steel wool pads or harsh/abrasive
cleaners.
2. Descale your kettle regularly to keep it working
efciently. Use a proprietary descaling product
following the manufacturer’s instructions
carefully.
CLEANING THE FILTER
Before removing or retting the lter, switch
off the kettle and empty it. Allow it to cool
completely, then unplug the power base from the
mains supply socket. Never operate the kettle
without the lter tted.
• Open the lid and remove the lter from behind
the spout.
• Rinse the lter under a tap whilst brushing it with
a soft brush.
• In hard water areas it may be necessary to
descale the lter using a descaling product. Use
a proprietary descaling product following the
manufacturer’s instructions carefully.
• The lter may be washed safely in the cutlery
rack of a dishwasher.
• Ret the lter back into your kettle.
VKT192_20EM1 (UK).indd 6-7VKT192_20EM1 (UK).indd 6-7 7/30/20 09:007/30/20 09:00
© 2021 Jarden Consumer Solutions (Europe) Limited. All rights reserved.
Jarden Consumer Solutions (Europe) Limited, 5400 Lakeside, Cheadle Royal Business
Park, Cheadle, Cheshire, SK8 3GQ, United Kingdom.
Newell Poland Services Sp. z o.o., Plac Andersa 7, Poznan, 61-894, Poland.
Jarden Consumer Solutions (Europe) Limited and Newell Poland Services Sp. z o.o. are
subsidiaries of Newell Brands Inc.
The product you buy may differ slightly from the one shown on this carton due to continuing
product development.
Made in China.
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside, Cheadle Royal Business Park,
Cheadle, SK8 3GQ, United Kingdom
Newell Poland Services Sp. z o.o.,
Plac Andersa 7, Poznan, 61-894, Poland.
e-mail: [email protected]
UK Telephone: 0800 028 7154
®
VKT192_20EM1 (UK) P.N. ART0000858737
GCDS-BRE-JC
VKT192_20EM1 (UK).indd 8VKT192_20EM1 (UK).indd 8 7/30/20 09:007/30/20 09:00
