Loading ...
Loading ...
Loading ...
Regular cleaning is important for preventing mold,
mildew, and other bacterial growth in your humidifier.
It also keeps your Tower working its best.
1. Let the unit run until it’s empty, then turn it o and
unplug it.
2. Remove the water bottles and grilles.
3. Remove the wicks. Throw the wicks away if it is time to
replace them. Otherwise, put them in a sink while you
finish cleaning your Tower.
4. Fill each bottle with water and ½ cup of white vinegar,
then put the bottle cap back on. Gently shake the
bottles, then lay them flat for 20 minutes. To disinfect,
replace the vinegar with 1 teaspoon of bleach in each
bottle. Do not mix vinegar and bleach.
5. After 20 minutes, empty the water bottles.
6. Dampen a sponge with white vinegar and wipe out the
base. To disinfect, replace the vinegar with bleach.
7. Rinse the base and bottles thoroughly.
8. Wipe everything dry and replace the wick, if needed.
Then reassemble.
When storing your Tower, discard the used filter and clean the unit
using either method above. Dry the unit thoroughly, and store in a
temperature-regulated area. Do not install a new filter until you are
ready to use your humidifier again.
ABOUT THE CODES
HOW TO CLEAN YOUR TOWER
6
Loading ...
Loading ...
Loading ...