Loading ...
Loading ...
Loading ...
2323
5
F (or E)
S
Fig. 5.21
AFTER CLEANING, REPLACE THE
INNER GLASS PANE
When replacing the inner glass pane, make
sure that:
• You replace the pane correctly, as
shown. The pane must be in the
position described below in order to
t into the door and to ensure that the
oven operates safely and correctly.
• You take extra care not to bump the
edges of the glass against any object
or surface.
• You do not force the pane into place.
If you are experiencing diculties
replacing the pane, remove it and start
the process again from the beginning.
If this still does not help, call Customer
Care.
To reassemble the inner pane of the oven
door operate as follows:
1. Make sure the door is locked open
(see fig. 5.15).
2. Replace the inner pane:
• Check that the four rubber pads are in
place (“D” in g. 5.18).
IMPORTANT: It is advisable, while
retting the glass, to keep pressed in
position the four rubber pads “D”, by a
nger, to avoid breakage or slippage of
the rubber pads themselves (g. 5.19).
• Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
• Insert the pane in the left “E” and right
“F” slide guides (g. 5.19), and gently
slide it to the retainers “H” (g. 5.20).
• Ret the hex screw “S” on left “E” or
right “F” slide guide, above the top
edge of the inner glass (g. 5.21).
IMPORTANT: Do not catch the glass
edge by the head of the screw “S”,
this could cause glass breackage. The
screw “S” is a safety measure only
to ensure the inner glass is correctly
tted, with the lower edge up to the
retainers "H".
• Unlock the oven door by opening it
completely and closing the lever “A”
on the left and right hinges (g. 5.22).
H
D
A
Fig. 5.22
Fig. 5.25
Fig. 5.18
F
E
Fig. 5.19
Loading ...
Loading ...
Loading ...