Loading ...
Loading ...
Loading ...
7
Please note: Do not cover the display or the slide touchscreen with accessories. If a utensil is covering one
of the displays, the hob may not function properly. On the right display, the message «CHECK TOUCH
AREA, remove the object within one minute» will appear. Remove the object and wait until the message
disappears. If the problem persists, disconnect and reconnect the power to the cooktop.
In the cooking zones close to the control panel, it is advisable to keep pots and pans inside the markings
(taking both the bottom of the pan and the upper edge into consideration, as this tends to be larger).
This prevents excessive overheating of the touchpad. When grilling or frying, please use the rear
cooking zones wherever possible.
3. Select the cooking zone or exible area from the left-hand display.
4. Set the desired power level by pressing or moving your nger horizontally across the slide
touchscreen.
P
18
O
The power level set will appear in the pane of the cooking zone selected.
Each cooking zone offers a range of different heat settings, from “1” (minimum power) to “18”
(maximum power).
Using the slide touchscreen, you can also select the quick heat function, which will appear on the display
with the letter “P”.
Please note: If the pot is not suitable for induction cooking, is not positioned correctly or is not of an
appropriate size, the cooking zone pane will ash. If no pot is detected within 30 seconds of making the
selection, the cooking zone switches off.
To deactivate the cooking zones:
Select the cooking zone in the left-hand display and press the “OFF” button at the top of the
slide touchscreen. If the cooking zone is still hot, the residual heat indicator “H” will appear in the
corresponding pane.
PLACE A POT
When using a cooking area composed of several zones, the pot can be placed anywhere on the active
area. The hob will automatically recognise the actual positioning of the pot.
If you wish to add an additional pot to the active cooking area, use the “Place a pot”
command to
allow the hob to detect the new pot.
KEY LOCK
To prevent accidental activation of the hob during cleaning, or to prevent the controls from being
changed accidentally whilst cooking, press the “Key lock” button for 3 seconds: a beep and a
warning light indicate that this function has been activated.
The control panel will be locked, with the exception of the off button.
Loading ...
Loading ...
Loading ...